Compare Prices

Steel Stud Kit DEALS

 - Steel Stud TV Mounting Kit for Tilt & Low Profile TV Mounts - Includes 4 Snaptoggle Anchors, Steel Drill Bit and TV Mounting Hardware
Steel Stud TV Mounting Kit for Tilt & Low Profile TV Mounts - Includes 4 Snaptoggle Anchors, Steel Drill Bit and TV Mounting

Mounting a TV into steel studs? You've come to the right place. Most TV mounts don't come with the necessary hardware for a steel-stud install. This kit gives you everything you need, including: 4 Snaptoggle anchors Steel stud drill bit Screws & washers of various sizes to ensure compatibility We made sure to include high-quality hardware so you can trust that your TV will stay mounted to steel studs. Just remember, only mount low-profile or tilting mounts to steel studs. Full-motion TV mounts are not recommended for steel studs, the twisting motion can warp the studs which is bad news for your structural integrity. NOTE: Toggler Steel Stud Anchors are not compatible with Dry Wall-only TV Wall Mount applications

  • Brand: ECHOGEAR
  • ASIN: B07CQ3Y421
  • UPC: 793795532657
 - 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by

Mount anything! The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8 to 3-5/8 thick including gypsum board, drywall, and concrete block, includes 1/4-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2 drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included...

  • Brand: TOGGLER
  • ASIN: B01IU6HG48
  • UPC: 757901773341
 - Full Motion TV Wall Mount with Steel Stud Mounting Kit, 4x200lbs TOGGLER SNAPTOGGLE Anchors&1/2
Full Motion TV Wall Mount with Steel Stud Mounting Kit, 4x200lbs TOGGLER SNAPTOGGLE Anchors&1/2" Drill bit. Fits 32 to 65 Inch 66lb TV's - for Metal/Steel Stud Walls in Condos/Commercial

Size information If your flat TV is between 32 and 65 inches with VESA 75 x 75mm to 400 x 400mm then you should have no problem mounting it on any kind of wall surface. Our mounting bracket fits VESA 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300m and 400x400mm. Adjustable articulating arm For your TV viewing comfort, you can extend your TV up to 15 inches from your wall and when done it can be retracted 2.5 inches to the wall for space saving convenience and safety. It can also be rotated and titled so you can view it from multiple directions, particularly ideal when trying to avoid glare from lights and windows. Able to hold TV's weighing up to 66lbs Advanced robotic welding technology ensures that our mounting bracket is secure and robust keeping your TV in position at all times. Made from heavy duty steel materials featuring a durable powder coated finish you can be rest assured that it stands up to the job when fitted following our instructional guide. All tools and parts included with your purchase Whether you choose wall or TV mounting, you will have everything you need to complete the job. The anchor included with your bracket is for concrete wall installation only and should not be used if mounting to a dry wall. Please...

  • Color: Black
  • Brand: Condo Mounts
  • ASIN: B07KWFX2C6
  • UPC: 627843937838
 - Fixed TV Mount for Metal/Steel Stud Walls and Walls Without Studs, 4 x 200lbs TOGGLER Drywall Anchors, 2 x Drill Bits, 6ft Cord Concealer to Hide 6 Wires. Complete Kit. No Hardware Store Visits.
Fixed TV Mount for Metal/Steel Stud Walls and Walls Without Studs, 4 x 200lbs TOGGLER Drywall Anchors, 2 x Drill Bits, 6ft Cord Concealer to Hide 6 Wires. Complete Kit.

CondoMounts - Unique TV Mounts For Your HomeWe develop state of the art TV mounts for today's homes. Unique mounts patented and designed out of Toronto, Canada. We have the best industry-wide rating for TV mounts.  TVF9044 Fixed Mount★Suitable for Most 42''-75'' TVs with Mounting Holes(VESA 200x200mm to 400x400mm).★Able to Hold TV's Weighing up to 132lbs.★0.98" Low Profile Super Slim Wall Mount Design. Hardware Included✔For Drywall with No Studs and Metal Studs:①Drywall Anchors (Toggle bolts)②Machine screws and washers for toggle bolts③½'' drill bit✔For Wood Stud Wall:①3/16'' pilot hole drill bit ②Lag bolts with matching socket nut driver✔For concrete and brick wall:①Wall plugs②Lag bolts with matching socket nuts✔Different length screws and spacers fit most TV✔Cord concealing kit (Peel & stick, Easy install)All tools and parts included with your purchase Whether you choose wall or TV mounting, you will have everything you need to complete the job. The anchor included with your bracket is for concrete wall installation only and should not be used if mounting to drywall. Please refer to the instructions for clarity.Additional accessories includedA full, detailed instruction manual is included with your purchase and to make it even easier we have...

  • Brand: CondoMounts
  • ASIN: B07MK3ZN44
  • UPC: 627843937821
 - 16 Pcs Stainless Steel Exhaust Manifold Stud Nuts Kit for Ford 4.6 5.4 Liter V8,2 Manifolds M8 Exhaust Stud
16 Pcs Stainless Steel Exhaust Manifold Stud Nuts Kit for Ford 4.6 5.4 Liter V8,2 Manifolds M8 Exhaust

Big-autoparts' Stainless Exhaust Manifold Stud Nuts Kits are engineered and tested to meet or exceed original standards and performance. Features: ♥High quality 304 stainless steel studs and serrated flange nuts kit better than ORIGINAL STUDS. ♥Constructed from top grade stainless steel,heat-treated for enhancing its stable performance and durability. ♥Great replacement for your original stud and bolt that are rust and broken. ♥All parts are engineered and tested to meet or exceed original standards and performance.durable and last long. ♥Easy to installation and original exhaust manifolds hardware replaced. ♥Exhaust manifold stud designed for Ford 4.6 & 5.4 Liter V8 Engine. Specifications: - Name:16 Pcs Stainless Exhaust Manifold Stud and Nuts - Condition: 100% Brand New(DO NOT USED) - Material:304 Stainless Steel - Color: Silver - Manufacturer Part Number: N811313S431,W701706-S2 - Warranty:2 years - Bolt Lengh: M8×50mm/2in - Nut Diameter: 7.6mm/0.3in - Package Weight: Approx.460g Compatible Fitment: - Ford 4.6 & 5.4 Liter V8 Engine Package Include: - 16 × Stainless Steel Exhaust Manifold Studs Nuts One (8pcs) Manifold please find www.amazon.com/dp/B0752BTW6J

  • Color: Metal Silver
  • Brand: big-autoparts
  • ASIN: B074J3VT1X
  • UPC: 682698039731
 - VideoSecu ML531BE TV Wall Mount for Most 27
VideoSecu ML531BE TV Wall Mount for Most 27"-55" LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 with Full Motion Swivel Articulating 20 in Extension Arm, HDMI

The VideoSecu articulating mount is a mounting solution for 25"- 42", some models up to 55 inch (Please check VESA and Weight). The TV mount fit VESA 200x200mm/200x100/100x100 (8"x8"/8"x4"/4"x4"). This wall mount comes with 4 removable mount adapters. It can extend the VESA to 400x400 400x300 400x200 300x300 300x200 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"). Please check your TV VESA; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate can be taken off for easy installation. Will the mount fit my TV? Firstly, please check the weight of your display, it should be less than 88 lbs. Secondly, If your Monitor or TV has 4 mounting holes on the back of the screen that are 400x400 400x300 400x200 300x300 300x200 200x200mm/200x100/100x100 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4") apart from each other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to make sure there are not any plug...

  • Color: Black
  • Brand: VideoSecu
  • ASIN: B000WYVBR0
  • UPC: 753182739939
 - (20 Pack) T-316 Cable Railing Kit Threaded Swage Stud and Stemball Swage Fitting 1/8
(20 Pack) T-316 Cable Railing Kit Threaded Swage Stud and Stemball Swage Fitting 1/8", Marine Grade Stainless Steel Stair Deck Wood Post Hardware System

  • Brand: Gexmil
  • ASIN: B07RLQQ7M7
  • UPC: 778778094988
 - Mounting Dream TV Wall Mounts TV Bracket for Most 32-55 Inch Flat Screen TV/ Mount Bracket, Full Motion TV Wall Mount with Swivel Articulating Dual Arms, Max VESA 400x400mm, 99 LBS Loading MD2380
Mounting Dream TV Wall Mounts TV Bracket for Most 32-55 Inch Flat Screen TV/ Mount Bracket, Full Motion TV Wall Mount with Swivel Articulating Dual Arms, Max VESA 400x400mm, 99

Fits 26-55" Tus this mount fits most of 26-55" Tus sold today. It fits TVs with mounting holes as close as 3"x3" Or as wide as 16"x16" (In TV terms - VESA 75x75mm to 400x400mm). specifically, it fits VESA 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Retracts 3" Low profile, extends 15. 2" From the wall with articulating arm, This mount retracts to 3"(to wall) to save space, and extends up to 15. 2" From the wall. Tilt, swivel and rotate function +5°/-15° tilt, +/-swivel and +/-3° rotation for maximum viewing flexibility, provide smooth adjustment for all directions, making it easy to view your TV from multi-angles. Heavy duty steel construction, 99 lbs. Loading capacity Constructed with heavy duty steel materials with durable powder coated finish. This mount is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted TV stable and secure, supporting TV weight up to 99 lbs. Bubble level and 9' High Speed HDMI cable It comes with bubble level and 9' Hemi cable. Hemi cable supports 3D, Ethernet, 1440p and audio Return conforming to latest HDMI 1. 4 standard. Includes most necessary mounting hardware This mount ships with hardware for both wall and TV mounting. Concre...

  • Color: Black
  • Brand: Mounting Dream
  • ASIN: B00SFSU53G
 - WELTEK Deck Cable Railing Kit, 10-Pack Threaded Stud Tension End Fitting Terminal & 105 Feet 1/8 Stainless Steel Aircraft Wire Rope - T316 7x7 Marine Grade
WELTEK Deck Cable Railing Kit, 10-Pack Threaded Stud Tension End Fitting Terminal & 105 Feet 1/8 Stainless Steel Aircraft Wire Rope - T316 7x7 Marine

WELTEK concentrate on your home and garden applications Threaded Therminal Stud * Perfect for 1/8 inch (3.2mm)stainless wire. * Stainless steel lag screw swage stud fits for cable railing into wood * Durable, strength and weather protection Stainless Steel Aircraft Wire Rope * T316 Marine grade stainless steel * Can be used for Indoor and Outdoor * Corrosion resistance,coxidation resistance and durable Package: 1 * 105ft stainless aircraft wire 10 * Threaded terminal stud

  • Brand: WELTEK
  • ASIN: B07FBMN6JW
  • UPC: 757255454828
 - Tilt TV Mount for Steel Stud, No Stud, Hollow Wall, Wood, Concrete, Brick, with Cord Concealing Kit- Universal Bracket for 42 to 75 Inch TV's. Includes No Stud & Steel Stud TV Mount Mounting Kit
Tilt TV Mount for Steel Stud, No Stud, Hollow Wall, Wood, Concrete, Brick, with Cord Concealing Kit- Universal Bracket for 42 to 75 Inch TV's. Includes No Stud & Steel

CondoMounts - Unique TV Mounts For Your HomeWe develop state of the art TV mounts for today's homes. Unique mounts patented and designed out of Toronto, Canada. We have the best industry-wide rating for TV mounts.  TVT9044 Fixed Mount★Suitable for Most 42''-75'' TVs with Mounting Holes(VESA 200x200mm to 400x400mm).★Able to Hold TV's Weighing up to 132lbs.★Tilt +/- 15 degree, 3" Low Profile Super Slim Wall Mount Design. Hardware Included✔For Drywall with No Studs and Metal Studs:①Anchors (Toggle bolts)②Machine screws and washers for toggle bolts③½'' drill bit✔For Wood Stud Wall:①3/16'' pilot hole drill bit ②Lag bolts with matching socket nut driver✔For concrete and brick wall:①Wall plugs②Lag bolts with matching socket nuts✔Different length screws and spacers fit most TV✔Cord concealing kit (Peel & stick, Easy install)All tools and parts included with your purchase Whether you choose wall or TV mounting, you will have everything you need to complete the job. The anchor included with your bracket is for concrete wall installation only and should not be used if mounting to drywall. Please refer to the instructions for clarity.Additional accessories includedA full, detailed instruction manual is included with your purchase and to make it even easie...

  • Brand: CondoMounts
  • ASIN: B07MVLD182
  • UPC: 627843937791
 - ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for 42
ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for 42"-80" TVs - Easy to Install On 16", 18" or 24" Studs & Features Smooth Articulation, Swivel, Tilt -

Wall mounting is the best way to get the most from your new large TV. Not only will it keep your investment safe, but will drastically enhance your viewing experience. You'd swear Charlie Sheen came over with all the winning you'll be doing once that 4k beauty is on the wall. So how will mounting your TV improve the viewing experience? So glad you asked. 1. Your screen will be at eye level If you set your TV on an entertainment center, the screen is often below the best viewing angle. By mounting, you can hang the TV in the sweet spot, with the middle of the screen lining up with your eye level. That gives you a better picture plus reduces fatigue during your Overwatch gaming marathons. Dibs on Zenyatta. 2. Point the TV almost anywhere This is the biggest benefit of full motion mounts. By extending from the wall, you have space to swivel the screen to point at any seat. Now you can get the perfect picture while sitting in that comfy recliner you found on the side of the road. Trust me, watching the Fast & Furious movies from your favorite spot enhances the enjoyment tenfold. Man, the Rock is so bad-ass. If you're feeling wild, you could even point the TV to a different room, like the kitchen. That means catching up on Silicon Valley while pan-searing that delicious bass you caugh...

  • Color: Black
  • Brand: ECHOGEAR
  • ASIN: B073QX1ZMS
  • UPC: 793795531704
 - Dewhel 16pcs stainless exhaust manifold stud kit 2 manifolds for Ford 4.6 & 5.4 Liter V8
Dewhel 16pcs stainless exhaust manifold stud kit 2 manifolds for Ford 4.6 & 5.4 Liter

Premium grade A2-70 stainless steelTHESE FIT ANY FORD 4.6 OR 5.4 LITER

  • Brand: DEWHEL
  • ASIN: B07KLW97F9
  • UPC: 661647791418
 - ECHOGEAR Tilting TV Wall Mount with Low Profile Design for 32-70 inch TVs - Eliminates Screen Glare with 15 Degrees of Smooth Tilt - Easy Install with All Hardware Included - EGLT1-BK
ECHOGEAR Tilting TV Wall Mount with Low Profile Design for 32-70 inch TVs - Eliminates Screen Glare with 15 Degrees of Smooth Tilt - Easy Install with All Hardware Included

Glare on your TV. Gross. We’ve all been there, you’re trying to get immersed in the world of your favorite movie but screen glare has got ya down.Say Goodbye To Screen GlareEchogear tilting TV brackets let you tilt the screen down to reduce reflections from windows, ambient light, or strobe lights from your crazy neighbor’s illegal rave parties. Mounting above a fireplace? A tilt mount is the best solution. Because you are mounting above eye level, tilting down is the best way to get viewing angles so fly, they'll make Maverick jealous.Low Profile For A Clean SetupAnother major benefit of choosing a tilt mount is a low profile. We built this mount to hold your TV close to the wall. You might be asking, with my TV so close to the wall, how do I connect cables? Good tilt mounts like this one can tilt up slightly. This enables you to easily access cables, which is important, because what good is a TV if you can’t hook up an N64 for your Mario Kart party? I guess you’ll just have to play Scrabble then…Not sure if this is the mount for you? An Echogear tilting mount will do the job if you want to:Mount your TV closer to the wallReduce glare from lights and windowsMount above eye level (like above a fireplace)Be safer around kiddos & doggosIf you need a full motion TV mount...

  • Brand: ECHOGEAR
  • ASIN: B00VMH7PQM
  • UPC: 793795529732
 - Hombt 62 Pack Cable Railing Swage Threaded Stud Tension End Fitting Terminal for 1/8 Cable Deck Railing Hand Swage T316 Stainless Steel Marine Grade
Hombt 62 Pack Cable Railing Swage Threaded Stud Tension End Fitting Terminal for 1/8 Cable Deck Railing Hand Swage T316 Stainless Steel Marine

★316 VS 304 material: 316 stainless steel has good anti-rust ability, can adapt to the humid environment such as the sea, and has higher quality. 304 is usually used at home. 306 can be used at home or in a humid or marine environment. This Screw Stud Thread Used to mount the 1/8 inch wire rope cable in the wooden Balusters Stainless Steel 316 Marine Grade Screw Fitting Terminal For 1/8 inch Cable Wire Rope Railing ★High tensile strength and anti-fatigue strength Weatherproof Thread Size = M6, Overall Length =98mm Build the railing will be easy and simple, you can make a railing for your garden, stairs, aisle. Color:Silver Material: 316 stainless steel ★Enhance Your home and garden: Use this threaded terminal stud screw to build the railing will be easy and simple, you can make a railing for your garden, stairs, aisle. All the accessories are stainless steel and they can be used outdoors. The railing will look amazing. ★Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

  • Color: 62 Pack
  • Brand: Hombt
  • ASIN: B07S18QFH3
  • UPC: 796862369286
 - TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8
TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included ...

  • Color: Clear
  • Brand: TOGGLER
  • ASIN: B0051IBBUE
  • UPC: 852661440011
 - PERLESMITH Full Motion TV Wall Mount Bracket Dual Articulating Arms Bear up to 132lbs for Most 37-70 inch TV with Tilt, Swivel, Rotation fit LED, LCD, OLED, Plasma Flat Screen TV, Max VESA 600x400mm
PERLESMITH Full Motion TV Wall Mount Bracket Dual Articulating Arms Bear up to 132lbs for Most 37-70 inch TV with Tilt, Swivel, Rotation fit LED, LCD, OLED, Plasma Flat Screen

Will the TV wall mount fit my TV? First, please check your wall for wood studs, it cannot be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation. Next, the weight of your TV should be less than 132lbs (60kg). then, mounting holes distance on the back of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Your TV should be at least 37 inch. Otherwise, you will see the bracket. In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs. Finally, please check possible blocked cable/input. Specifications: Fits 37" To 70" Flat panel TVs supports TV weight up to 132lbs/ 60kg fits VESA mounting hole patterns: 600x400mm/ 400x400mm/ 400x300mm/ 300x300mm/ 300x200mm/ 200x200mm tilt adjusts 15 degrees forward or 5 degrees backward swivel up to 180 degrees extends up to 16" And folds 2. 8" From the wall to save space Wall mounting studs distance up to 16" Rotate 3 degrees for perfect TV level adjustment package includes: 1x TV wall mount 1x standard mounting hardware 1x 6ft high speed HDMI cable 1x magnetic bubble level 5x cable ties 1x User Manual

  • Color: Black
  • Brand: PERLESMITH
  • ASIN: B07CPTM23L
  • UPC: 736900376661
 - Blika (Lot of 10) Cable Railing Swage Threaded Stud Tension End Fitting Terminal for 1/8
Blika (Lot of 10) Cable Railing Swage Threaded Stud Tension End Fitting Terminal for 1/8" Cable Deck Railing Hand Swage T316 Stainless Steel Marine

Product Description: What you'll get: 10 pcs Threaded Terminal Stud End Fitting and 9-month warranty To finish your cable railing project you might need 10 pcs Lag Screw Swage Stud Fitting Terminal Thread : https://www.amazon.com/dp/B07CG5WG1H 10 pcs Lag Screw Swage Turnbuckle: https://www.amazon.com/dp/B07C8BMSL3 10 pcs Lag Screw Swage Turnbuckle & Lag Screw Swage Stud (Best Value Set) https://www.amazon.com/dp/B07CG96NCL Stainless Steel Protector Sleeves: 10 pcs https://www.amazon.com/dp/B07DJ97CNL 65 pcs https://www.amazon.com/dp/B07DJ9T8Q9 Tips: If you have any pre-sale or after-sale questions please feel free to contact us,we will be happy to assist you.

  • Color: Silver
  • Brand: Blika
  • ASIN: B07C89NFVK
  • UPC: 840637163217
 - Tilting TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED, LCD, OLED, Plasma Flat Screen TVs with VESA 400x400mm Weight up to 115lbs by PERLESMITH
Tilting TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED, LCD, OLED, Plasma Flat Screen TVs with VESA 400x400mm Weight up to 115lbs by

PERLESMITH mount -- make your world betterthe tilting wall mount is suitable for 23" - 55" Flat-panel TVs. Its tilting system makes it easier to adjust the viewing angle. The design ensures TV mounting stability and security. Adjustable TV brackets offer lateral shift movement to allow perfect TV position, even with off-center wall wood studs. Tv is positioned just 1. 2"/ 30. 4 mm from the wall for a clean, low-profile appearance. Comes with a 6 feet HDMI cable and 5 pcs cable tie, to save you time and money! description: tilts up to 7 degrees for an optimal viewing experience. Vesa mounting standard: 75 x 75mm, 100 x 75mm, 100 x 100mm, 200 x 100mm, 200 x 200mm, 300 x 200mm, 300 x 300mm, 400 x 200mm, 400 x 300mm, 400 x 400mm. package contents: 1x standard mounting hardware1x user manual1x 6ft HDMI cable5x cable tie

  • Color: Black
  • Brand: PERLESMITH
  • ASIN: B01JRNIWJG
  • UPC: 889743564716
 - ARP 400-8022 M8 x 1.25 x 38mm Stainless Steel Stud Kit - 10 Piece
ARP 400-8022 M8 x 1.25 x 38mm Stainless Steel Stud Kit - 10

Automotive Racing Products (ARP) started in 1968, in Southern California. Their product line includes everything from engine and driveline fasteners for OEM replacement parts to exotic specialty hardware for the Formula 1, Indycar, NASCAR, NHRA Drag Racing, and Marine Applications. They produce a number of specialty products like cylinder head fastener kits, connecting rod bolts, exhaust manifold/header fastener kits, oil pan fastener kits, piston ring compressors, and more.

  • Brand: ARP
  • ASIN: B005ASTH06
  • UPC: 672036022761
 - TV and Furniture Anti-Tip Straps Heavy Duty Strap and All Metal Parts | All Flat Screen TV/Furniture Mounting Hardware Included | No Plastic Parts (2 Pack, Black)
TV and Furniture Anti-Tip Straps Heavy Duty Strap and All Metal Parts | All Flat Screen TV/Furniture Mounting Hardware Included | No Plastic Parts (2 Pack,

BABY PROOFING AT ITS BEST! Don't settle for anything less than the best! Secure Home by Jessa Leona has gone to great lengths to design and manufacture the highest quality products. Every product we put our name on, we trust in our own home to keep our little ones safe! STRESS-FREE SAFETY Secure Home by Jessa Leona gives you the security needed to keep your baby safe from one of the number one hazards in your home. Our Anti-Tip TV straps are made with the highest quality materials, don't use any plastic parts and come with all the hardware needed to secure your TV or Furniture. PEACE OF MIND HAS NEVER BEEN SO SIMPLE! Our unique design comes with everything you need to secure your Flat Screen TV or Furniture. The perfectly angled metal plates give the high quality straps the ideal angle to hold your TV snug to the wall or to the piece of furniture it's on. You will find all the hardware needed to secure your TV or piece of furniture. 100% MONEY BACK WARRANTY We are so confident you will love our product, we back it with our no questions asked, 90-Day 100% money back guarantee. If our product fails, we will send you a replacement free of charge or refund your full purchase price. Furthermore, if you are unhappy for any reason, simply return your product within 90 days of purchas...

  • Color: Black
  • Brand: Secure Home by Jessa Leona
  • ASIN: B0153XNDL6
  • UPC: 795569698965

Steel Stud Kit - Online Shop Results - Showing more then 65 results at ShopWorldlux.com

Promotions on Steel Stud Kit, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Stained Glass Night Light Patterns, Front De Li Tray, and Electric Torque Screwdriver

Looking for more Steel Stud Kit similar ideas? Try to explore these searches: Volkswagen Auxiliary Fan Switch, 3/4 Sleeve Satin Trim, and Performance Head.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.