Malida 1/4" Tee 3 Way Tube Quick Connect Push Fit RO Water Reverse Osmosis System set of
Easy to install. Suitable for water,coffee,etc. Features: 1/4" 3-way Tee quick connect. Package: Quantity: 10 pcs connect
- Brand: Malida
- ASIN: B00YYKB9K2
- UPC: 712641079993
Uxcell a17040800ux1807 3/8-inch x 3/8-inch x 1/4-inch T Shaped 3 Way Tube Quick Push in Connector 3pcs for RO Water
Push fit fittings, quick connect fitting, easy to install.Provides a permanent/removable leak-proof connection, Corrosion free.Suitable for water and food applications..
- Color: White,Blue
- Brand: uxcell
- ASIN: B073C9BKKR
DIGITEN 3/8" 3/8" 1/4" 3-Way Reducing Tee Tube Quick Connect for RO Reverse Osmosis (Pack of
Food Quality and suitable for Reverse Osmosis water system,etc.
- Brand: DIGITEN
- ASIN: B00X6R9Z46
- UPC: 713458679895
TmallTech 1/4" 3-way Union Tee Quick Connect Push Fit RO Water Reverse Osmosis Filter (Pack of
Apply to Reverse Osmosis Water System and Housing In Line Filters
- Brand: TmallTech
- ASIN: B00VRVTBY2
- UPC: 713458679635
JG Speedfit PP30121208WP 3/8-Inch by 3/8-Inch by 1/4-Inch Reducing
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40-Percent when compared to traditional fixing methods.
- Color: N/A
- Brand: JG Speedfit
- ASIN: B005S4KVZC
- UPC: 665626120138
Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock (1/4 inch
User's Guide 1. Except air and water,don't attempt to use the fittings on other fluids 2. The tube fitting is prohibited where spark and fire might be occurred 3. The tube fitting is prohibited if water temperature is above 60'C 4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.Caution Check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.Please refer to following instruction in connection of tubing.When you insert the air tubing into the joint,you will have two-step feeling.Section one is locking claw and section two is sealing ring.Must insert tube into section two.Sleeve is used in tubing connection and disconnection.The sleeve is designed as an oval shape,which is covienient in assembly and disassembly.However,round sleeve is available to met any special demand the product has limited space for oval sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure its firm connection. Always use proper tool to tighten external hexagonal and internal hexagonal parts of the tube fitting.Always apply recommended torque on screws otherwise extra torque might damage thread and cause air leakage while insufficient torque mi...
- Brand: utah pneumatic
- ASIN: B01MY6JEJ9
- UPC: 650966585327
Watts P-640 Quick Connect Tee, 1/2-Inch
1/2", quick connect tee, hold up to 250 psi, 1 piece, no parts to assemble or lose, quick connect design allows quick & easy connections without the use of installation tools, great for new installations or Plumbing repair projects for pox, copper, & cpvc pipe, just cut pipe & push pox, copper or cpvc tubing into fitting end until tubing seats at stop, can be disconnected by pulling back on ring & releasing pipe, code approved for behind wall without access & direct in ground burial installations, nsf-14, nsf-61, CSA/astm & upc code listed & approved, excellent Replacement for quest & flare it type fittings. The product is manufactured in china. Easy installation and easy handling.
- Color: N/A
- Brand: Watts
- ASIN: B000BOA320
- UPC: 098268299458
Joyway 3/8"x 1/4"x 3/8" ID Hose Reduce Barb, Tee 3 Way Union Fitting Intersection/Split Brass
This Joyway Series tee hose fitting is made of forged brass and connects and branches three hoses. This tee fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- Brand: Joyway
- ASIN: B07HL9NGWV
- UPC: 781573284508
Tool Daily Pressure Washer Tee, Splitter Coupler, Quick Connect Two Gun to One Power Washer, 3/8 Inch
This Two-Gun Tee Coupler converts a one-gun pressure washer into a two-gun system. This is a good way to power wash on a big job if you don't have 2 machines. Quick connect this Branch Tee onto the pressure washer outlet, then connect two pressure washer hoses to either end of the 2-gun splitter. Allows for 2 pressure washer users simultaneously. If your pressure washer produces 4.0 GPM, 4000 PSI, it requires a size 4.0 nozzle. When splitting the GPM between the two guns, you would instead use TWO 2.0 nozzles, allowing each gun to receive 2.0 GPM, 4000 PSI. Pressure (PSI) and flow rate (GPM) can be adjusted by changing the nozzle size.
- Brand: Tool Daily
- ASIN: B07Q2333V3
15 Pcs 3/8 Push Fittings, Plastic Push to Connect Fitting Tube Tee Connect, Air Tool Fittings Pneumatic Quick Fittings Lock 3/8 inch OD
Feature: 1. The Stainless steel gripping ring ensures excellent tube retention while the D seal 2. You can easily change the tubing connector direction. Narrow space is also suitable with the push 3. Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily 4. Widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical Specifications: Material: PU Plastic Push Fluid Type: Air, Vacuum Working Pressure: 0-1.0 MPa| 0-150 Psi Proof Pressure: 3.0Mpa| 435 Psi Working Temperature: 0-60°C| 32～140°F Negative Pressure: -100Kpa| -29.5 In Hg Weight: 2.8 ounces Applicable Tube: PU / PA / PE / PVC Package Included: 15 x T Shape Push to Connect Tube Fittings
- Color: 3/8 inch
- Brand: Yarr Store
- ASIN: B07H2H61RX
- UPC: 700961424401
Camco Propane Brass 4 Port Tee- Comes with 5ft and 12ft Hoses, Allows for Connection Between Auxiliary Propane Cylinder and Propane Appliances
The Camco RV 4-Port Propane Tee mounts in-line between the supply and regulator on a motorhome to allow the connection of an additional propane appliance and the hook-up of an auxiliary propane cylinder. Its ports include a female POL, Excess Flow Soft Nose POL, 1" - 20 male throwaway cylinder thread and 1/4" Inverted Flare. The 5' phone hose has an Excess Flow Soft Nose POL and 1/4" Inverted Male Flare. The 12' propane hose has a 1" male and 1" female swivel -20 throwaway cylinder thread.
- Brand: Camco
- ASIN: B0014JG7RQ
- UPC: 014717591232
YZM Quick Connect fittings RO Water Filters (10, Tee 1/4" Tube
Applications: Apply to Reverse Osmosis Water System Quick Conncetor .
- Brand: YZM
- ASIN: B01N9GHRUR
- UPC: 607569656893
Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union Connect Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to check the external connectors surface for any scratch. You need to consider the following guidelines during installations Fix the air hose connector into the joint ; there are two sections around this region namely : 1 Locking claw 2 Sealing ring : it's important to insert the tube into this ring. Use sleeve for fittings connection and disconnection.Note that the sleeve is an oval shaped plumbing material that is essentially used for assembling and disbanding purpose. The round sleeve is available for any plumbing needs.On the other hand, there is limited space for the oval sleeve. Once the connection has been established ,pull the connectors to confirm their firmness. Use the right tool to tighten the external hexagonal and internal hexagonal parts of the tube fitting. It's crucial for ...
- Brand: utah pneumatic
- ASIN: B075NCLV41
- UPC: 652827872331
PureSec 2018 1/4-inch OD Push to Connect Quick Fitting Combo for RODI System(Ball Valve+T+Y+L+I Assortment Package, Pack of
What is it? "This replacement Combo Kit is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools.Operated by hand, it replace threaded or flanged connections, which require wrenches. It is used to branch off to different outlets for your RO unit.This Kit fits standard OD 1/4" Copper, CPVC, PEX and PVC tubing for most RO systems " Where to use it? Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. How to use it? Just pop in your 1/4" tubing into each end, pushing until it won't go in. To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to insure no leaks. Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it's crooked, or not inserted all the way, or crimped, it may leak What you will receive? 2 x 1/4" OD Inline Shutoff Ball Valve2x 1/4" OD Union Connector2x 1/4" OD Union Elbow2x 1/4" Union Tee2x 1/4" Two Way Divider "C" clips
- Color: White
- Brand: PureSec
- ASIN: B07D629S7W
- UPC: 607569643213
LASCO 06-9101 Angle Stop Add-A-Tee Valve, 3/8-Inch Compression Inlet X 3/8-Inch Compression Outlet X 1/4-Inch Compression Outlet,
LASCO 06-9101 Angle Stop Add-A-Tee Adapter 3/8" Female Compression X 3/8" Compression X 1/4" Compression . Angle Stop Add-A-Tee, 3/8-Inch OD (Outside Diameter) Female Compression x 3/8-Inch OD (Outside Diameter) Compression x 1/4-Inch OD (Outside Diameter) Compression, Carded.
- Color: Brass
- Brand: LASCO
- ASIN: B003B6JC40
- UPC: 052151815972
SNS SPE-1/2 1/2" Tube OD Union Tee Type Plastic Push to Quick Connect Tube Fitting(10
▪ Fluid: Air & Liquid (for liquid should be customized) ▪ Pressure Range:0-1Mpa(130PSI) ▪ Temperature Range: 0～60℃ ▪ Applicable Tube: PU/ Nylon/ Soft PE ▪ Various sizes for option ▪ Fine seal performance ▪ Quick installation and easy to disconnect
- Brand: SNS
- ASIN: B07D3NPCSP
Watts P-840 Quick Connect Tee, 3/4-Inch
3/4", quick connect tee, hold up to 250 psi, 1 piece, no parts to assemble or lose, quick connect design allows quick & easy connections without the use of installation tools, great for new installations or Plumbing repair projects for pox, copper, & cpvc pipe, just cut pipe & push pox, copper or cpvc tubing into fitting end until tubing seats at stop, can be disconnected by pulling back on ring & releasing pipe, code approved for behind wall without access & direct in ground burial installations, nsf-14, nsf-61, CSA/astm & upc code listed & approved, excellent Replacement for quest & flare it type fittings. The product is manufactured in china. Easy installation and easy handling.
- Color: NULL
- Brand: Watts
- ASIN: B000BO76YS
- UPC: 098268299939
3/8"-1/4" Tee Quick Connect Fittings + 15 Locking clips Ro Water Filter Pack of
100% New,Never Used Suitable for Reverse Osmosis System. Tee union connector quick connect Fitting Normal use for Reverse Osmosis water filter systems/ housing in line filters etc. Tube O.D.(Left x Right x Middle): 3/8" x 3/8" x 1/4" Material:Plastic Color: White Package Included: 5pcs Tee Union Quick Fitting
- Color: White
- Brand: JIUWU
- ASIN: B00YGR2BCS
- UPC: 701385462871
YZM 10 pcs 1/4" Quick Connect Push In to Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System+10 meters(32 feet) tubing hose pipe (1/4 white tubing 10meters +
No tools required,Push fit fittings Easy to use,Mini quick connect push tee 1/4-Inch OD Push fit fittings,Quick Connect Fitting 1/4" RO Water System Standard fitting for water filter systems using 6mm water filter tubing
- Color: 1/4 white tubing 10meters + connector 10pcs
- Brand: YZM
- ASIN: B07BFFTMJL
- UPC: 607569657579
Fuel Line Connector Quick Connect Tee 3/8 to 1/4 on Branch Nylon Tubing Hose Union T Quick Connect, Fit for 3/8 to 1/4 inch OD Nylon Tube/Gas Line Pack of
Automotive Fuel Line 1/4 to 3/8 quick connect tee connector pneumatic nylon tubing hose union, Fit for 6 to 9.5mm OD Nylon Tube Pack of 2Also comes in different sizes, pls contact us for more product information.
- Color: tee connector reducer union
- Brand: autoBbox
- ASIN: B07L3QBLDS