Compare Prices

Npt Elbow DEALS

 - Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4
Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe to 1/4" NPT Female

Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe, 1/4" NPT Female Pipe Specification:Hose tube fittings connect, control, change the direction of, and terminate the flow in piping and hose systems.They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear.Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

  • Color: 1/4"
  • Brand: boeray
  • ASIN: B07318CNHG
  • UPC: 610521819588
 - Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/4
Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/4" Male Pipe x 1/4" Female

The Anderson Metals 90-degree street elbow pipe fitting is made of brass barstock and has a female National Pipe Taper (NPT) threaded connection and a male NPT threaded connection. This 90-degree street elbow fitting, or "street ell," connects two pipes, one with a male end and the other with a female end, at a 90-degree angle to change the direction of flow between pipes. It has female NPT threads on one end and male NPT threads on the other for connecting a male and a female threaded pipe. The NPT threads create a tighter seal than straight threads. This fitting is made from brass barstock for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass barstock is machined to creating a seamless, dense material that resists splitting and leaking. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in...

  • Brand: Anderson Metals
  • ASIN: B000BQRHHM
  • UPC: 719852935957
 - Brass Pipe Fitting, SUNGATOR 90 Degree Barstock Street Elbow, 1/4
Brass Pipe Fitting, SUNGATOR 90 Degree Barstock Street Elbow, 1/4" Male Pipe x 1/4" Female Pipe, Pneumatic Fitting

The 90-degree street elbow pipe fitting is made of brass and has a female National Pipe Taper (NPT) threaded connection and a male NPT threaded connection. It is installed between two lengths of pipe or tubing to allow a change of direction and can apply to water, gas, oil , fuel and withstand up to 100 °C (212 °F) , with a wide range of uses. Why durable: High strength, high hardness premium solid brass of a longer service life with thick wall, more durable than iron and iron galvanized pipe fittings, not a cast product. Why professional: Precisely milled, threads are tighter and deeper, not easy to slip, smooth threads will reduce the resistance during installation, saving time and improving efficiency. Why SUNGATOR: SUNGATOR is committed to bringing cost-effective products to customers, so that customers get more than they pay, high quality products to our own requirements, customer's satisfaction is our pursuit! Tips: For better sealing, we suggest that all fittings must be used with teflon tape. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories. Contents: 2 pack of 1/4" NPT male pipe x 1/4" NPT female pipe.

  • Brand: SUNGATOR
  • ASIN: B07MTWSXRL
 - Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/4
Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/4" NPT Male x 1/4" NPT Male

This Anderson Metals 06130 90-degree barstock elbow is a brass pipe fitting with 1/4" male NPT threads. The 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The 90-degree barstock street elbow has fair vibration resistance and is suitable in low to medium pressure applications.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

  • Brand: Anderson Metals
  • ASIN: B00D3CVY5W
  • UPC: 719852121992
 - Anderson Metals Brass Pipe Fitting, Barstock 90 Degree Elbow, 1/4
Anderson Metals Brass Pipe Fitting, Barstock 90 Degree Elbow, 1/4" x 1/4" Female

The Anderson Metals 90-degree elbow pipe fitting is made of brass barstock and has female National Pipe Taper (NPT) threaded connections. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made from brass barstock for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass barstock is machined to creating a seamless, dense material that resists splitting and leaking. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available ...

  • Brand: Anderson Metals
  • ASIN: B000BOAR7Q
  • UPC: 719852935698
 - Legines Brass Street Elbow, 1/4
Legines Brass Street Elbow, 1/4" NPT Male x 1/4" NPT Female, 90 Degree Forged Pipe Fitting,(Pack of

This 90-degree forged street elbow pipe fitting is made of forged brass and has a 1/4" female National Pipe Taper (NPT) threaded connection and a 1/4" male NPT threaded connection. This 90 degree street elbow fitting connects two pipes with same diameters, at a 90-degree angle to change the direction of flow between pipes. The NPT threads create a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and it is forged to increase the material's strength and resistance to mechanical shock and vibration. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness) Specification: -Maximum working pressure: Operating pressure UP to 1200psi -Measurement System: Inch -Material: Brass - Type: 90°Degree Street Elbow Forged..

  • Brand: Legines
  • ASIN: B074DTTZ62
 - Coxreels 6088 90 Degree Straight Elbow for Spring Driven Reel, Male x Female NPT, 300 psi, 1/4
Coxreels 6088 90 Degree Straight Elbow for Spring Driven Reel, Male x Female NPT, 300 psi, 1/4",

Coxreels 90 degree straight elbow for spring driven reel. Brass low pressure Male x NPT Female fitting thread. 1/4-inches inner diameter. Maximum pressure 300 pounds per square inch.

  • Color: Brass
  • Brand: Coxreels
  • ASIN: B00GYV9CSA
 - Brennan 5502-02-02-SS Stainless Steel Pipe Fitting, 90 Degree Elbow, 1/8
Brennan 5502-02-02-SS Stainless Steel Pipe Fitting, 90 Degree Elbow, 1/8" NPT Male X NPT

This Brennan 90-degree elbow is a stainless steel 316 pipe fitting with male National Pipe Taper (NPT) threads on one end and female NPT threads on the other end to connect and change the flow direction between two different types of pipe. The elbow has NPT threads for creating tighter seals than straight threads and is made from stainless steel 316, which is more corrosion resistant than stainless steel 304. This fitting meets SAE J514 specifications for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Brennan Industries manufactures critical flow components. The company, founded in 1953 and headquartered in Solon, OH, meets International Organization for Standardization (ISO) 9001:2008 standards and its fittings meet Society of Automotive Engineers (SAE) specifications.

  • Brand: brennan
  • ASIN: B004Y18ER2
 - EDGE INDUSTRIAL Forged Brass 90 Degree Street Elbow 1/4
EDGE INDUSTRIAL Forged Brass 90 Degree Street Elbow 1/4" Male NPT X 1/4" Female NPT Fuel/AIR/ Water/Oil/ Gas

1/4" Male NPT x 1/4" Female NPT 90° Forged Brass Elbow Pipe Fitting. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07D23YDZ1
  • UPC: 691023895683
 - Tailonz Pneumatic PL-3/8-N2 Push to Connect Tube Fitting, Male Elbow - 3/8
Tailonz Pneumatic PL-3/8-N2 Push to Connect Tube Fitting, Male Elbow - 3/8" Tube OD x 1/4" NPT Thread (Pack of

【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.【IT IS EASY TO USE】 It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. 5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. 6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval...【3/8 nylon tube】ASIN:B07P1TDMRQ 【PL-1/4-N1】ASIN:B07PHZGK3F【PL-1/4-N2】ASIN:B07P7BFZ6T

  • Brand: Tailonz
  • ASIN: B07R87H7S8
 - EDGE INDUSTRIAL 3/8
EDGE INDUSTRIAL 3/8" Hose ID to 1/4" Male NPT MNPT 90 Degree BARSTOCK Elbow Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty

3/8" Hose ID x 1/4" Male NPT Brass 90 Degree Barstock Elbow Barb Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07DP66TX4
  • UPC: 691023897489
 - Sydien 90 Degree Elbow 1
Sydien 90 Degree Elbow 1" NPT Threaded Pipe Fitting Female x Female,Stainless Steel 304(1

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping. This elbow pipe fitting has socket openings on both ends and is suitable for connecting two threaded pipes at a 90-degree angle to change the direction of flow between pipes.

  • Color: 1"
  • Brand: Sydien
  • ASIN: B07RLNQ53P
  • UPC: 745679816582
 - Metalwork 304 Stainless Steel Forged Pipe Fitting, 3/8
Metalwork 304 Stainless Steel Forged Pipe Fitting, 3/8" NPT Female x 3/8" NPT Male 90 Degree Street Elbow, 1

The Brass stainless steel 304 forged pipe fitting is a 90-degree street elbow with male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for changing flow direction between two pipes. Made of stainless steel 304 to ensure higher corrosion resistance than 302 grade steel. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Color: 1 Pcs
  • Brand: Metalwork
  • ASIN: B07DP95QWG
 - Tailonz Pneumatic Male Elbow - 1/4
Tailonz Pneumatic Male Elbow - 1/4" Tube OD x 1/8" NPT Thread,PL-1/4-N1 Push to Connect Tube Fitting (Pack of

【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.【IT IS EASY TO USE】 It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. 5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. 6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.【1/4 nylon tube】ASIN:B07P56RNXK【PL1/4-N2】1/4 od x 1/4 npt ASIN:B07P7BFZ6T

  • Brand: Tailonz
  • ASIN: B07PHZGK3F
 - EDGE INDUSTRIAL Brass 90 Degree Street Elbow 3/8
EDGE INDUSTRIAL Brass 90 Degree Street Elbow 3/8" Male NPT X 3/8" Female NPT Fuel/AIR/ Water/Oil/ Gas

3/8" Male NPT x 3/8" Female NPT 90° Brass Elbow Pipe Fitting. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07D24M7V6
  • UPC: 691023895645
 - Stainless Steel Cast Pipe Fitting - 90 Degree Street Elbow, Class 150, 1 1/2
Stainless Steel Cast Pipe Fitting - 90 Degree Street Elbow, Class 150, 1 1/2" NPT Male x Female

The 90-degree elbow cast pipe fitting with male and female National Pipe Taper (NPT) threads for changing flow direction between two pipes.This elbow is made of stainless steel 304, which is higher strength and more corrosion resistant than stainless steel 302. Class 150 is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Product Features:1.Widely use: Pipe threads are common to common pipes and easy to replace and install. 2.Corrosion resistance: 304 stainless steel, nickel and chromium combined, corrosion resistance. 3.Hardness: 304 stainless steel is twice as hard as copper and ten times as hard as aluminum. 4.Rust - free: Even in humid environment, it still has strong oxidation resistance and does not corrode. 5.Shine as new: the surface of 304 stainless steel is silvery white and shiny as new in 10 y...

  • Color: Silver
  • Brand: DERNORD
  • ASIN: B07CV9QMFV
  • UPC: 698253849660
 - Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8
Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8" Barb x 1/4" Male

This Anderson Metals hose fitting is made of brass and has a 90-degree elbow shape for connecting hose to threaded pipe conforming to the National Pipe Thread (NPT) standard at an angle. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT connector on the other end connects to threaded pipe. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

  • Brand: Anderson Metals
  • ASIN: B0045LNDP4
  • UPC: 719852936404
 - EDGE INDUSTRIAL 1/4
EDGE INDUSTRIAL 1/4" Hose ID to 1/4" Male NPT MNPT 90 Degree Brass Elbow Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty

1/4" Hose ID x 1/4" Male NPT Brass 90 Degree Elbow Barb Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07CQD5JSS
  • UPC: 713807491840
 - Vixen Horns 1/4
Vixen Horns 1/4" NPT Male to 1/4" NPT Female L Shape/Elbow/90 Degree Brass Fitting for Train/Air Horn Tanks (3-Pack)

This elbow fitting has on one side ¼" NPT male and on the other ¼" NPT female. Can be used with copper, brass, aluminum, or steel tubing. Guarantee to provide reliable connection for high pressure air applications. A high quality fitting manufactured to the highest standards made of premium brass construction for maximum strength and durability. Ideal for air tanks installation. L Shape Fitting (3 Pack) ¼" NPT Male to ¼" NPT Female Brass Material

  • Brand: Vixen Horns
  • ASIN: B07C8LQDNP
  • UPC: 636967109793
 - Anderson Metals Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/8
Anderson Metals Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/8" Female Pipe x 1/8" Male

The Anderson Metals 45-degree street elbow pipe fitting is made of brass barstock and has a female National Pipe Taper (NPT) threaded connection and a male NPT threaded connection. This 45-degree street elbow fitting, or "street ell," connects two pipes, one with a male end and the other with a female end, at a 45-degree angle to change the direction of flow between pipes. It has female NPT threads on one end and male NPT threads on the other for connecting a male and a female threaded pipe. The NPT threads create a tighter seal than straight threads. This fitting is made from brass barstock for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass barstock is machined to creating a seamless, dense material that resists splitting and leaking. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in...

  • Brand: Anderson Metals
  • ASIN: B006PKKWV6
  • UPC: 719852118251

Npt Elbow - Online Shop Results - Showing more then 88 results at ShopWorldlux.com

Promotions on Npt Elbow, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Study Book Bookends, Pendaflex 2' Expansion Hanging, and Pittsburgh Penguins Round Clock

Looking for more Npt Elbow similar ideas? Try to explore these searches: Turquoise Disc, Karen Hill Tribe Silver Wire, and Sonya Tee.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.