Compare Prices

Milky Way Soap Mold DEALS

 - Hibiscus Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 05
Hibiscus Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Dimensions: 3" x 1. 375" Number of Cavities: 3 Ounces: 4 Known for its showy flowers that can grow to 10", the hibiscus (or mallow) plant is treasured for its ability to attract butterflies, hummingbirds, and bees. It also makes a darn fine tea! Our Hibiscus soap mold is a beautiful, exotic option for floral soaps. Common Uses: Melt & Pour Soap. Cold Process Soap. Points of Interest: Manufacturer: Milky Way Molds Material: Clear PVC (Not Approved for Food Contact) Country of Origin: United States Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B00L1GO0BW
 - Milky Way Sand Dollar Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 166
Milky Way Sand Dollar Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Sand Dollar Milky Way Soap Mold 4 Cavity.

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B01MQFIP11
  • UPC: 709112465010
 - Milky Way Goat Milk Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 09
Milky Way Goat Milk Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B00L1GODVY
  • UPC: 709112464792
 - Milky Way - 3 Funny Goats Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 188
Milky Way - 3 Funny Goats Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B01LZC71CC
  • UPC: 709112475712
 - Dirty Dog Milky Way Soap or Chocolate Mold 4 Cavities
Dirty Dog Milky Way Soap or Chocolate Mold 4

  • Brand: Milky Way
  • ASIN: B017DU9CEE
 - Milky Way Dragonfly Guest Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 261
Milky Way Dragonfly Guest Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B07HNLWSXH
  • UPC: 711662635928
 - Milky Way Queen Bee Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 189
Milky Way Queen Bee Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B07HMJ52P1
  • UPC: 711662635782
 - Milky Way Sugar Skull Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 466
Milky Way Sugar Skull Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B01M7QVZR6
  • UPC: 709112476061
 - Love Soap Mold (MW 220) -  Milky Way. Melt & Pour, Cold Process w/ Exclusive Copyrighted Full Color Cybrtrayd Soap Molding Instructions in a Sealed Poly Bag
Love Soap Mold (MW 220) - Milky Way. Melt & Pour, Cold Process w/ Exclusive Copyrighted Full Color Cybrtrayd Soap Molding Instructions in a Sealed Poly

The designs for milky way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easily to release 12-24 hours after cooling with Exclusive Copyrighted CybrTrayd Melt & Pour Soap Molding Instructions

  • Brand: CybrTrayd
  • ASIN: B01I30LQ7Y
  • UPC: 709112467625
 - Milky Way Paw Prints Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 37
Milky Way Paw Prints Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Paw Prints Milky Way Soap Mold ...

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B00L1GN1N0
  • UPC: 709112465546
 - Milky Way Honeybee Guest Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 105
Milky Way Honeybee Guest Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Dimensions: 1.875" x 1.875" x .75" Number of Cavities: Ounces: 1.7 Showcase your honey or beeswax soaps with this lovely design featuring a hard-working honey bee. Our Guest Tray Honeybee soap mold makes 16 guest sized soaps. Common Uses: Melt & Pour Soap. Cold Process Soap. Points of Interest: Manufacturer: Milky Way Molds Material: Clear PVC (Not Approved for Food Contact) Country of Origin: United States Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B00L1GOFJE
  • UPC: 709112465294
 - Filigree Bee Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 01
Filigree Bee Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B00L1GOQZW
  • UPC: 709112465461
 - Milky Way Celtic Clover Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 64
Milky Way Celtic Clover Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Celtic Clover Bar Milky Way Soap Mold ...

  • Color: Clear
  • Brand: Milky way
  • ASIN: B00L1GP5NY
  • UPC: 709112465577
 - Milky Way Mr. Owl Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 582
Milky Way Mr. Owl Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B07HMSRW53
  • UPC: 711662635898
 - Milky Way Handmade Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 15
Milky Way Handmade Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

Handmade -Tray Milky Way Soap Mold

  • Color: Clear
  • Brand: Milky Way
  • ASIN: B00L1GP6Y2
 - Milky Way Chakras 3 Soap Molds - Clear PVC - Not Silicone
Milky Way Chakras 3 Soap Molds - Clear PVC - Not

Chakras Soap or Chocolate Mold

  • Brand: Milky Way
  • ASIN: B00UGK5XRO
 - Milky Way Butterfly Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 262
Milky Way Butterfly Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B01GVQ6REO
  • UPC: 709112465133
 - Floral Ovals Soap Mold by Milky Way - Clear PVC
Floral Ovals Soap Mold by Milky Way - Clear

The Floral Ovals Soap Mold features three Art Nouveau-inspired designs with stunning detail that will bring the garden inside. Makes (3) 3.75 oz. Bars Bar Dimensions: 3.5" x 2.5" x 1.125" Common Uses: Melt & Pour Soap. Cold Process Soap. Points of Interest: Manufacturer: Milky Way Molds Material: Clear PVC (Not Approved for Food Contact) Country of Origin: United States Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

  • Brand: Milky Way
  • ASIN: B077184J5X
 - Milky Way - Crazy Hearts Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 50
Milky Way - Crazy Hearts Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar...

  • Brand: Milky Way
  • ASIN: B01GVQ6GRC
  • UPC: 709112464815
 - Fir Tree Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 96
Fir Tree Milky Way Soap Mold - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW

This charming Christmas Tree Soap Mold has artistically scrolling branches and a star on top. Perfect for Christmas soaps. Common Uses: Melt & Pour Soap. Cold Process Soap. Lotion Bars. Points of Interest: Manufacturer: Milky Way Molds Material: Clear PVC (Not Approved for Food Contact) Country of Origin: United States Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle. California Prop 65 Statement: This product is not on the CA Prop 65 list of toxic chemicals. Helpful Product Information: Material: Plastic Style: Bar Avg. Bar Weight: 5.25 oz Bar Cavities: 3 Bar Depth: 1" Bar Length: 4" Bar Width: 3" Max Temperature: 145 Mold Capacity (oz): 15.75

  • Brand: Milky Way
  • ASIN: B01MSIKEE2

Milky Way Soap Mold - Online Shop Results - Showing more then 37 results at ShopWorldlux.com

Promotions on Milky Way Soap Mold, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Wide Copper Bracelet, Puppy Love Backpack, and Leather Lined Jersey

Looking for more Milky Way Soap Mold similar ideas? Try to explore these searches: Foam Limb, Black Swing Arm Wall Lamp, and Mint Green Infant T-Shirts.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.