Compare Prices

Lathe Backplate DEALS

 - HHIP 3900-3212 3 Jaw Chuck 1-1/2-8 Threaded Backplate, 4
HHIP 3900-3212 3 Jaw Chuck 1-1/2-8 Threaded Backplate,

4" 1-1/2" 8 Threaded 3-Jaw Backplate Assembly instructions included. D is 4". D2 is 10 2.90". Bolt circle is 3.3". Number of bolt holes is 3.

  • Brand: HHIP
  • ASIN: B013E305UY
  • UPC: 769053022970
 - Chuck Adapter, 1-3/4
Chuck Adapter, 1-3/4"-8 Thread 6"

*NOTE* These adapters require machining on the lathe on which they will be used.Instructions are included for final turning of the registration diameter on your lathe to insure perfect concentricity

  • Brand: LittleMachineShop.com
  • ASIN: B01N0W8UXY
 - 6
6" 6-JAW SELF-CENTERING LATHE CHUCK w. top&bottom jaws w. D1-4

6" - 6 jaw self-centering lathe chuck with D14 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. PRECISION SEMI-STEEL BODIES. TOP QUALITY. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING. 1-3/4" THRU HOLE DIAMETER Back screw circle dia. 145mm Back recess circle dia. 130mm

  • Brand: CME
  • ASIN: B07523QQDR
 - Threaded Backplate Adapter 4
Threaded Backplate Adapter 4" 3-Hole 1-1/2"-8 For Lathe

Threaded Backplate Adapter 4" 3-Hole 1-1/2"-8 For Lathe Chucks

  • Brand: All Industrial
  • ASIN: B017C3W5A0
  • UPC: 635963994822
 - Threaded Backplate Adapter 5
Threaded Backplate Adapter 5" 3-Hole D1-3 For Lathe

Threaded Backplate Adapter 5" 3-Hole D1-3 For Lathe Chucks

  • Brand: All Industrial
  • ASIN: B017C3W9DI
  • UPC: 635963994976
 - Threaded Backplate Adapter 4
Threaded Backplate Adapter 4" 3-Hole 3/4"-16 For Lathe

Threaded Backplate Adapter 4" 3-Hole 3/4"-16 For Lathe Chucks

  • Brand: All Industrial
  • ASIN: B017C3VVY6
  • UPC: 635963994853
 - HHIP 3900-3305 Backplate/Adapter for 4
HHIP 3900-3305 Backplate/Adapter for 4" Lathe Chucks,

HHIP Unthreaded backplate/adapter for 4 inch lathe chucks. No bolt holes. Machining is required before mounting your chuck to ensure concentricity. For 3 and 4-jaw chucks. Made of high grade casting steel.

  • Brand: HHIP
  • ASIN: B01LTFBKK8
  • UPC: 769053087566
 - Factory 3 Jaw Self Centering Lathe Chuck 50 mm with Backplate for Rotary Tables
Factory 3 Jaw Self Centering Lathe Chuck 50 mm with Backplate for Rotary

3 Jaw Self Centering Chuck 50MM With Backplate for Rotary Tables 3" and 4" Suitable for 4 Slot Rotary Tables only

  • Brand: Factory
  • ASIN: B07L3SWYKN
 - Threaded Backplate Adapter 5
Threaded Backplate Adapter 5" 3-Hole D1-4 For Lathe

Threaded Backplate Adapter 5" 3-Hole D1-4 For Lathe Chucks

  • Brand: All Industrial
  • ASIN: B017C3W88O
 - Threaded Backplate Adapter 4
Threaded Backplate Adapter 4" 3-Hole 2-1/4"-8 For Lathe

Threaded Backplate Adapter 4" 3-Hole 2-1/4"-8 For Lathe Chucks

  • Brand: All Industrial
  • ASIN: B017C3W014
  • UPC: 635963994877
 - Factory 3 Jaw Self Centering Lathe Chuck 65mm with Backplate for 3
Factory 3 Jaw Self Centering Lathe Chuck 65mm with Backplate for 3" & 4" Rotary

3 Jaw Self Centering 65mm Chuck With Backplate for 3" & 4" Rotary Tables Suitable for 4 Slot Rotary Tables only

  • Brand: Factory
  • ASIN: B07L3TXK5W
 - Adapter, 5
Adapter, 5" Lathe Chuck

5" Lathe chuck adapter.This adapter lets you mount a 5" lathe chuck on your mini lathe in place of a 3" (80 mm) chuck.The adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three holes.This adapter has a 95 mm diameter registration boss and is drilled for both 3- and 4-jaw chucks on a 108 mm bolt circle.

  • Brand: LittleMachineShop.com
  • ASIN: B01N2Z9EDW
 - HHIP 3901-5038 ER-40 Collet Chuck, 132 mm Diameter x 42 mm Height
HHIP 3901-5038 ER-40 Collet Chuck, 132 mm Diameter x 42 mm

132MM Diameter ER-40 Collet Chuck ~ Mount to your choice of backplate to use on a lathe. ~ Can also be used as a fixture on a milling table. ~ Concentricity is . 0016". ~ D1 is 132mm. ~ D is 100mm. ~ L is 42mm.

  • Brand: HHIP
  • ASIN: B01LW772DK
  • UPC: 769053088884
 - PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock

Heavy duty #2MT live tailstock center with a 60 degree point. Huge live center for heavy duty workpieces. Cone is 2-1/2" long, by 1-11/16" diameter. This center is large and strong with precision bearings. It runs very true and is also well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.

  • Color: Multi
  • Brand: PSI Woodworking
  • ASIN: B000KIEPSA
  • UPC: 689076540797
 - Stone Harbor Hardware Hole Filler Plate (Vintage Bronze)
Stone Harbor Hardware Hole Filler Plate (Vintage

Stone Harbor Hardware was founded on the idea that you shouldn’t have to compromise when it comes to your home. We believe it’s possible to have both high-quality products and exceptional value. We believe that value is more than dollars and cents; it’s about products that stand the test of time and look good doing it. To this end, we created hardware that we’re not only proud to sell, but proud to own.

  • Color: Vintage Bronze
  • Brand: Stone Harbor Hardware
  • ASIN: B01BMW2XTK
  • UPC: 874965009343
 - PSI Woodworking LCENTSS22 No. 2 MT with  1-Inch Crown Super Wood Lathe Drive Center
PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive

Get a better bite on your spindle with PSI's new 1' Super Center. More teeth give a better bite while providing equal pressure and a positive drive. There is no need to hammer your drive center into the work piece and risk splitting your work. The PSI Super Center Crown compatible with headstocks with #2MT spindles. Spring loaded point simplifies spindle centering and retracts to avoid splitting your work when tailstock pressure is applied. Ships in plastic production sleeves at 4.8-ounces. 4.5" by 1.5" by 1.5" with a 1-inch crown.

  • Brand: PSI Woodworking
  • ASIN: B000KICD52
  • UPC: 700516979264
 - Accusize Tools - D1-5 Spindle Taper, 6
Accusize Tools - D1-5 Spindle Taper, 6" Chuck Dia, D= 6.29" Fully Machined Lathe Chuck Back Plate, D1 Type Adapter for Most 4 Jaw Independent Chucks,

Spindle Taper: D1-5, Chuck Diameter:6" D=6.29" Need machining the back plate shoulders based on different 4 jaw independent chucks The back plate outside diameter is smaller than the lathe chuck diameter due to the mounting holes are towards the center of the lathe chuck, then the recess diameter D2 of the lathe chuck still provide a tight fit.

  • Brand: Accusize Industrial Tools
  • ASIN: B07D854D5B
 - Grizzly H3412 Cast Iron Faceplate, 4-Inch by 3/4-Inch by 16 TPI
Grizzly H3412 Cast Iron Faceplate, 4-Inch by 3/4-Inch by 16

Cast iron provides plenty of mass for smooth turning. Specifications: Size: 3/4" x 4" TPI: 16 Approximate weight: 1.25 lbs.

  • Brand: Grizzly
  • ASIN: B0000DD5B7
  • UPC: 690550134128
 - Defender Security U 9517 Lock Back Plate, 3-1/2-Inch, Chrome Plated, 2-Pack
Defender Security U 9517 Lock Back Plate, 3-1/2-Inch, Chrome Plated,

This backplate is constructed from steel and comes finished in nickel. It is used to cover marred doors. It allows you to convert a 2-3/8 in. backset to a 2-3/4 in. backset or vice versa.

  • Color: Chrome
  • Brand: Defender Security
  • ASIN: B0072L1EPA
  • UPC: 049793095176
 - POWERTEC 71022 6-1/2-Inch Universal Router Plate
POWERTEC 71022 6-1/2-Inch Universal Router

Introducing the Universal Router Base Plate with Centering Pin by POWERTEC. This convenient woodworking tool adds precision to your routing applications, while offering a flexible option that accommodates a wide assortment of standard routers. It can be used for template routing, edge routing, shaping and grooving and works with inlays, straight and curved edges. Increased functionally permits routing along the edges to be easier and more precise by keeping your router leveled on the work piece, ultimately reducing the natural tipping that may occur when routing on a board’s edge. Features• Made of durable, super thick 5/16 inch clear acrylic to give your work optimal visibility. • Comes with a convenient centering pin to ensure solid and centered attachment to your router. • Optimized with tested predrilled holes to convert a large list of routers to the more standard 1-3/16” Porter Cable style guide bushings. • Includes multiple sets of screw sizes to accommodate router template guide variations. • An ergonomic grip with an extended sized base provides added stability for simplistic cutting. • Reversible fence allows edge routing with bits that don’t have bearing guides on both straight and curved edges. Ideal for cutting dados as well. Accommodates to the fol...

  • Brand: POWERTEC
  • ASIN: B002E4VC1G
  • UPC: 736815006158

Lathe Backplate - Online Shop Results - Showing more then 41 results at ShopWorldlux.com

Promotions on Lathe Backplate, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Silver Hydrogel, New Patented Moisturizing, and Hair Rollers Case Pack

Looking for more Lathe Backplate similar ideas? Try to explore these searches: Outdoor Replacement Cushion, John Deere Bagger, and Hps Gate.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.