Compare Prices

Grooved Bearing DEALS

 - 20pcs 1.5mm Deep Metal V Groove Guide Pulley Rail Ball Bearings Wheel 4*13*6mm
20pcs 1.5mm Deep Metal V Groove Guide Pulley Rail Ball Bearings Wheel

Package Included:20 pcs Wire pulley with V groove

  • Brand: Preamer
  • ASIN: B012KKTBRU
  • UPC: 710185353111
 - 5x 83010mm Nylon Round Pulley U Groove Track Roller Bearing,double Shielde 608zz Bearing Inside by Preamer
5x 83010mm Nylon Round Pulley U Groove Track Roller Bearing,double Shielde 608zz Bearing Inside by

Injection Material: White POM Bearing Material: High Carbon Steel

  • Color: White
  • Brand: Preamer
  • ASIN: B014884ZYG
  • UPC: 711301729988
 - Quality VXB Set of 8 RM2-2RS 3/8 V-Groove Guide Bearing Sealed Ball Bearings Vgroove W2X
Quality VXB Set of 8 RM2-2RS 3/8 V-Groove Guide Bearing Sealed Ball Bearings Vgroove

Quality VXBTM Brand, you will get a set of 8pcs. RM2-2RS 3/8" V Groove Guide Bearing Set of 8 Bearings RM2-2RS 3/8" VGrooved Guide Bearing, bearing is a Sealed, Item is RM2-2RS Bearing, Vgrooved bearings are used to guide a CNC router or in any linear motion application, equal to W2X

  • Brand: VXB
  • ASIN: B00H5713L6
 - RWM Casters VIR-0415-08 4
RWM Casters VIR-0415-08 4" Diameter X 1-1/2" Width Cast Iron V-Groove Wheel with Straight Roller Bearing, 700 lbs

RWM V-Groove wheels are high strength cast iron (VI) castings or forged steel (VF) forgings machined with a 90 degree groove for operation on an inverted angle iron track. Care must be made to assure the inverted angle iron track is parallel to ensure smooth and constant tracking. In some cases it may be advisable to run inverted angle iron on one side with V-Groove wheels and flat bar stock steel on the other side with a flat faced cast iron or forged steel wheel. V-Groove Wheels are used to control the flow of a load, i.e., into an oven, between machines, over long distances or where "production line" sequence is required. Bore is available in various sizes on some wheels and Keyways can be installed on most sizes.

  • Color: Black
  • Brand: RWM Casters
  • ASIN: B00426CJZW
 - 20pcs 624ZZ 4mm V Groove Sealed Guide Pulley Rail Ball Bearing 4x13x6mm
20pcs 624ZZ 4mm V Groove Sealed Guide Pulley Rail Ball Bearing

Package Included:20 pcs Wire pulley with V groove

  • Brand: Preamer
  • ASIN: B014ER3QKK
  • UPC: 740690520722
 - Atoplee 20pcs Metal Sealed Guide Wire Line Track Deep U Groove Pulley Rail Ball Bearing U624ZZ4 (4x13x7mm)
Atoplee 20pcs Metal Sealed Guide Wire Line Track Deep U Groove Pulley Rail Ball Bearing U624ZZ4

Features: 100% brand new and high quality U groove Sealed Ball Bearings This item is ordinary precision, adaptation to low speed, low load applications Package Included: 20pcs U groove Sealed Ball Bearings

  • Brand: ATOPLEE
  • ASIN: B00YBXOMRE
 - Atoplee 20pcs High Carbon Steel Wire V Groove Pulley Bearing (3x12x4mm)
Atoplee 20pcs High Carbon Steel Wire V Groove Pulley Bearing

Specifications: Material:High Carbon Steel Dimension:(Inside diameter)3mm x (outer diameter)12mm x (thickness)4mm V groove width: 2.5mm V groove deepness: 1mm Package Included: 20pcs wire pulley with V groove

  • Color: Silver
  • Brand: ATOPLEE
  • ASIN: B017H4VBVS
  • UPC: 601308130279
 - Prime-Line Products D 1506 Sliding Door Roller, 1-1/2-Inch Nylon Ball Bearing, 2-Pack
Prime-Line Products D 1506 Sliding Door Roller, 1-1/2-Inch Nylon Ball Bearing,

Bottom adjustment rollers with wide center groove. 1-1/2 In. nylon ball bearing rollers. Steel inner race with 1/4 In. hole.

  • Brand: Prime-Line
  • ASIN: B000NCUY1A
  • UPC: 783961255787
 - Letool10pcs 3124mm High Carbon Steel 1.5mm Deep V Groove Guide Pulley Rail Ball Bearings Wheel
Letool10pcs 3124mm High Carbon Steel 1.5mm Deep V Groove Guide Pulley Rail Ball Bearings

  • Brand: Letool
  • ASIN: B019QEC9EA
 - W1/2 Grooved Race Thrust Bearing 1/2 x 1 9/32 x 5/8 Inch
W1/2 Grooved Race Thrust Bearing 1/2 x 1 9/32 x 5/8

W1/2 Grooved Race Thrust Ball Bearing 0.5" x 1.281" x 0.625" W1/2 Grooved Race Thrust Ball Bearing, this is a popular size that could be used in many application that uses this size 1/2" x 1 9/32" x 5/8".Thrust bearing is known to high axial loads.Bearing is made of Chrome Steel. * Item: W1/2 Ball Bearing * Type: Thrust Ball Bearing * Size: 1/2" x 1 9/32" x 5/8" * Quantity: One Bearing

  • Brand: VXB
  • ASIN: B002IG3GX2
 - Atoplee 10pcs 3x12x4mm High Carbon Steel Wire V Groove Pulley Bearing
Atoplee 10pcs 3x12x4mm High Carbon Steel Wire V Groove Pulley

Specifications: Material:High Carbon Steel Dimension:(Inside diameter)3mm x (outer diameter)12mm x (thickness)4mm V groove width: 2.5mm V groove deepness: 1mm Package Included: 10pcs wire pulley with V groove

  • Color: Silver
  • Brand: ATOPLEE
  • ASIN: B00PACBLW4
  • UPC: 702380037545
 - SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 25mm Bore, 42mm OD, 11mm Width, 6520lbf Static Load Capacity, 3570lbf Dynamic Load Capacity
SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 25mm Bore, 42mm OD, 11mm Width, 6520lbf Static Load Capacity, 3570lbf

This SKF single-direction, three-piece thrust ball bearing has an Annular Bearing Engineers’ Committee (ABEC)-1 precision rating, grooved races, a 90-degree contact angle, a pressed steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed sheet steel cage prevents the balls from coming into contact with each other durin...

  • Brand: SKF
  • ASIN: B007VHGOF0
 - SKF 51107 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 35mm Bore, 53mm OD, 12mm Width, 8430lbf Static Load Capacity, 3910lbf Dynamic Load Capacity
SKF 51107 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 35mm Bore, 53mm OD, 12mm Width, 8430lbf Static Load Capacity, 3910lbf

This SKF single-direction, three-piece thrust ball bearing has an Annular Bearing Engineers’ Committee (ABEC)-1 precision rating, grooved races, a 90-degree contact angle, a pressed steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed sheet steel cage prevents the balls from coming into contact with each other durin...

  • Brand: SKF
  • ASIN: B007VHGOVO
 - W3/8 Grooved Race Thrust Bearing 3/8 x 1 x 17/32 Inch
W3/8 Grooved Race Thrust Bearing 3/8 x 1 x 17/32

W3/8 Grooved Race Thrust Ball Bearing 3/8" x 1" x 17/32" Inch W3/8 Grooved Race Thrust Ball Bearing, this is a popular size that could be used in many application that uses this size 3/8" x 1" x 17/32".Thrust bearing is known to high axial loads.Bearing is made of Chrome Steel. * Item: W3/8 Ball Bearing * Type: Thrust Ball Bearing * Size: 3/8" x 1" x 17/32" Inch * Size: 0.375" x 1" x 0.532" Inch * Quantity: One Bearing

  • Brand: VXB
  • ASIN: B002IG3GYQ
 - NSK 51105 Thrust Bearing, Single Row, 3 Piece, Grooved Race, Pressed Steel Cage, Metric, 25mm Bore, 42mm OD, 11mm Width, 4800rpm Maximum Rotational Speed, 37000N Static Load Capacity, 19700N Dynamic Load Capacity
NSK 51105 Thrust Bearing, Single Row, 3 Piece, Grooved Race, Pressed Steel Cage, Metric, 25mm Bore, 42mm OD, 11mm Width, 4800rpm Maximum Rotational Speed, 37000N Static Load Capacity, 19700N Dynamic

This NSK single-row, three-piece thrust ball bearing has grooved races and a pressed steel cage. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance clas...

  • Brand: NSK
  • ASIN: B007Z35KCS
  • UPC: 029176026409
 - FAG 51113 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 65mm ID, 90mm OD, 18mm Width, 3400rpm Maximum Rotational Speed, 22000lbf Static Load Capacity, 8300lbf Dynamic Load Capacity
FAG 51113 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 65mm ID, 90mm OD, 18mm Width, 3400rpm Maximum Rotational Speed, 22000lbf Static Load Capacity, 8300lbf

This FAG single-row thrust ball bearing has grooved raceways, a 90-degree contact angle, a steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings...

  • Brand: FAG Bearings
  • ASIN: B007MFI2SS
 - SKF 51106 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 30mm Bore, 47mm OD, 11mm Width, 7530lbf Static Load Capacity, 3780lbf Dynamic Load Capacity
SKF 51106 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 30mm Bore, 47mm OD, 11mm Width, 7530lbf Static Load Capacity, 3780lbf

This SKF single-direction, three-piece thrust ball bearing has an Annular Bearing Engineers’ Committee (ABEC)-1 precision rating, grooved races, a 90-degree contact angle, a pressed steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed sheet steel cage prevents the balls from coming into contact with each other durin...

  • Brand: SKF
  • ASIN: B007VHGONC
 - SKF 51102 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 15mm Bore, 28mm OD, 9mm Width, 3150lbf Static Load Capacity, 2100lbf Dynamic Load Capacity
SKF 51102 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 15mm Bore, 28mm OD, 9mm Width, 3150lbf Static Load Capacity, 2100lbf

*** FACTORY NEW *** THIS LISTING IS FOR - ( 1 ) PIECE 51102 SKF, SINGLE ROW BALL BRGS *** FACTORY STOCK ***

  • Brand: SKF
  • ASIN: B007VHGNJW
 - SKF 51205 Grooved Race Thrust Bearing, 3 Piece, ABEC 1 Precision, 90° Contact Angle, Open, Steel Cage, Metric, 25mm Bore, 47mm OD, 15mm Width, 55000.0 pounds Static Load Capacity, 27600.00 pounds Dynamic Load Capacity
SKF 51205 Grooved Race Thrust Bearing, 3 Piece, ABEC 1 Precision, 90° Contact Angle, Open, Steel Cage, Metric, 25mm Bore, 47mm OD, 15mm Width, 55000.0 pounds Static Load Capacity, 27600.00

This SKF three-piece thrust ball bearing has an Annular Bearing Engineers’ Committee (ABEC)-1 precision rating, grooved races, a 90-degree contact angle, a pressed steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed sheet steel cage prevents the balls from coming into contact with each other during use, reducing fr...

  • Brand: SKF
  • ASIN: B007VGG4KG
 - NSK 51104 Thrust Bearing, Single Row, 3 Piece, Grooved Race, Pressed Steel Cage, Metric, 20mm Bore, 35mm OD, 10mm Width, 5300rpm Maximum Rotational Speed, 26600N Static Load Capacity, 15100N Dynamic Load Capacity
NSK 51104 Thrust Bearing, Single Row, 3 Piece, Grooved Race, Pressed Steel Cage, Metric, 20mm Bore, 35mm OD, 10mm Width, 5300rpm Maximum Rotational Speed, 26600N Static Load Capacity, 15100N Dynamic

This NSK single-row, three-piece thrust ball bearing has grooved races and a pressed steel cage. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance clas...

  • Brand: NSK
  • ASIN: B007Z35JBA
  • UPC: 029176026393

Grooved Bearing - Online Shop Results - Showing more then 61 results at ShopWorldlux.com

Promotions on Grooved Bearing, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Almond Milk Foam, Wear Jean Shorts, and Monkey Crib Bedding

Looking for more Grooved Bearing similar ideas? Try to explore these searches: Animal Feed, Tan Bottle, and One Industries Icon T-Shirt.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.