Compare Prices

Genie Lift Truck DEALS

 - Vestil A-LIFT-R-HP Fixed Straddle Hand Winch Lift Truck, 35
Vestil A-LIFT-R-HP Fixed Straddle Hand Winch Lift Truck, 35" Length, 25" Width, 67-1/2" Height, 400 lbs

The Vestil A-LIFT-R-HP standard hand winch lift truck can be used to transport a pallet of goods, and it has a steel and aluminum frame, a hand-crank winch, six wheels, and two steel forks that can be raised or lowered to an optimal height for loading or unloading. The hand-crank winch has a reversible handle that can be used to raise or lower the forks by 1 inch with each complete revolution. A pivoting latch secures the fork carriage for transport. The forks can be inverted to adjust the service range. The two front wheels measure 2 inches in diameter and swivel for maneuverability. The two rear wheels measure 8 inches in diameter. Two loading wheels near the top of the frame allow the lift truck to be loaded into a truck bed for transport. This material lift has a load capacity of 400 lb., weighs 140 lb., and measures 68 x 24 x 35 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It has a service range of 23-1/2 to 120 inches high with the forks up and 3-1/2 to 98-7/16 inches high with the forks down. Each fork measures 1-3/4 x 4 x 22 inches (H x W x D). The width between the forks is 13 inches. The outside fork width is 21-1/2 in...

  • Brand: Vestil
  • ASIN: B0052PH7N6
 - Vestil A-LIFT-S-EHP Adjustable Straddle Hand Winch Lift Truck, 42-1/2
Vestil A-LIFT-S-EHP Adjustable Straddle Hand Winch Lift Truck, 42-1/2" Length, 43-1/4" Width, 80" Height, 350 lbs

The Vestil A-LIFT-S-EHP straddle hand winch lift truck can be used to transport a pallet of goods, and it has a steel and aluminum frame, an adjustable base, a hand-crank winch, six wheels, and two steel forks that can be raised or lowered to an optimal height for loading or unloading. The width of the base can be adjusted from 29 to 44 inches wide to straddle wide loads. The hand-crank winch has a reversible handle that can be used to raise or lower the forks by 1 inch with each complete revolution. A pivoting latch secures the fork carriage for transport. The forks can be inverted to adjust the service range. The two front wheels measure 2 inches in diameter and swivel for maneuverability. The two rear wheels measure 8 inches in diameter. Two loading wheels near the top of the frame allow the lift truck to be loaded into a truck bed for transport. This cart has a load capacity of 350 lb., weighs 154 lb., and measures 79 x 29 x 43 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It has a service range of 21-1/4 to 143-11/16 inches high with the forks up and 1-1/4 to 122 inches high with the forks down. Each fork measures 1-3/4 x 4 ...

  • Brand: Vestil
  • ASIN: B002S4H3N8
  • UPC: 691215057578
 - Genie Lift Control Box Cover/Protector
Genie Lift Control Box

This cover is designed to fit all Fuel Powered RT Genie boom lifts. Made from commercial-grade heavy duty vinyl material. There is a zipper in the front for easy access so the controls are able to be used while machine is in operation. Many switch and controller issues on a Genie boom lift are a caused by moisture getting in to your control box. Keep the weather out with this platform control box cover.

  • Color: Blue
  • Brand: Aftermarket
  • ASIN: B072MLTRT7
  • UPC: 688939235979
 - Vestil LLW-202058-FW Light Load Lift with Hand Winch, Steel, 29-3/4
Vestil LLW-202058-FW Light Load Lift with Hand Winch, Steel, 29-3/4" Length, 20-1/16" Width, 66-1/2" Height, 500 lbs

The Vestil LLW-202058-FW light load lift can be used to transport heavy materials, and it has a steel frame, a hand winch, four swivel caster wheels, two fixed rear wheels, and a platform that can be raised or lowered to an optimal height for loading or unloading. This material lift is made of steel, which is resistant to wear and corrosion. The hand winch can be used to raise the platform by 1 inch with each complete rotation. The four caster wheels swivel for maneuverability, measure 2 inches in diameter, and are made of semi-steel, which is resistant to abrasions and wear. The two mold-on rubber rear wheels measure 2 inches wide and 6 inches in diameter, absorb shocks and vibrations, won't deflate or scratch floors, and are resistant to wear. Two loading wheels near the top of the frame allow the lift to be loaded into a truck bed for transport. This lift has a load capacity of 500 lb., weighs 145 lb., and measures 66-1/2 x 20-1/16 x 29-3/4 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The platform measures 20 x 20 inches (W x D) and has a service range of 3-1/4 to 58 inches high. This product is intended for use in profession...

  • Brand: Vestil
  • ASIN: B001VXY8AI
  • UPC: 691215027083
 - Vestil A-Lift-R-HP Lightweight Hand Operated Lift Truck, 400 Lb. Cap. Fixed Legs, Lot of 1
Vestil A-Lift-R-HP Lightweight Hand Operated Lift Truck, 400 Lb. Cap. Fixed Legs, Lot of

The Vestil A-LIFT-R-HP standard hand winch lift truck can be used to transport a pallet of goods, and it has a steel and aluminum frame, a hand-crank winch, six wheels, and two steel forks that can be raised or lowered to an optimal height for loading or unloading. The hand-crank winch has a reversible handle that can be used to raise or lower the forks by 1 inch with each complete revolution. A pivoting latch secures the fork carriage for transport. The forks can be inverted to adjust the service range. The two front wheels measure 2 inches in diameter and swivel for maneuverability. The two rear wheels measure 8 inches in diameter. Two loading wheels near the top of the frame allow the lift truck to be loaded into a truck bed for transport. This material lift has a load capacity of 400 lb., weighs 140 lb., and measures 68 x 24 x 35 inches (H x W x D). It has a service range of 23-1/2 to 120 inches high with the forks up and 3-1/2 to 98-7/16 inches high with the forks down. Each fork measures 1-3/4 x 4 x 22 inches (H x W x D). The width between the forks is 13 inches. The outside fork width is 21-1/2 inches. This product is intended for use in professional and industrial environments., Lot of 1

  • Brand: Vestil
  • ASIN: B0027YIKE0
  • UPC: 691215002226
 - Pake Handling Tools - Electric Work Positioner Lift Truck, 330 lbs Capacity
Pake Handling Tools - Electric Work Positioner Lift Truck, 330 lbs

Convenient, battery-operated lift is easy to transport around the job site. Includes 110VAC charger, push-button control pad with digital display, and detachable control wand. Platform Size: 18-1/2''* 23-5/8'' Recommend to use in S3 - Intermittent periodic duty

  • Brand: Pake Handling Tools
  • ASIN: B0753XFLMD
  • UPC: 850111008088
 - Ultra-Fab Products 48-979071 Ultra T-Slot Drill Attachment for Scissor Jack
Ultra-Fab Products 48-979071 Ultra T-Slot Drill Attachment for Scissor

Ultra T-Slot Scissor Jack Drill Attachment.

  • Brand: Ultra-Fab Products
  • ASIN: B00Q6ISG4M
  • UPC: 771395247256
 - Keyman Pair of Genie Lifts Keys
Keyman Pair of Genie Lifts

Pair of Genie Lift Keys

  • Brand: Keyman
  • ASIN: B00KAMHKDI
 - Vestil ALLW-2020-FW Aluminum Lite Load Lift Winch, 3-1/4
Vestil ALLW-2020-FW Aluminum Lite Load Lift Winch, 3-1/4" - 58" Height Range, 20" Length x 20" Width Platform, 400 lbs

Lift and transport loads from delivery trucks to docks, or use to inventory storage systems. Easy to operate with either a hand winch or foot pump. The platform lifts approximately 1" per winch rotation or foot pump stroke. Aluminum construction. Models with the suffix - FW roll smoothly on 6" diameter by 2" tread width poly-on-poly rear wheels with 2" semi-steel front wheels. Located on the handle are two rollers to ease loading into delivery trucks. Horizontal load center is 10". Low profile units have a deck height of 1/4" with 2" high side lips. Platform measures 20" length by 20" width. 3-1/4" to 58" service range.

  • Brand: Vestil
  • ASIN: B0054M082Y
  • UPC: 691215002349
 - Vestil A-LIFT-R Fixed Straddle Hand Winch Lift Truck, 35
Vestil A-LIFT-R Fixed Straddle Hand Winch Lift Truck, 35" Length, 25" Width, 67-1/2" Height, 500 lbs

The Vestil A-LIFT-R standard hand winch lift truck can be used to transport a pallet of goods, and it has a steel and aluminum frame, a hand-crank winch, six wheels, and two steel forks that can be raised or lowered to an optimal height for loading or unloading. The hand-crank winch has a reversible handle that can be used to raise or lower the forks by 1 inch with each complete revolution. A pivoting latch secures the fork carriage for transport. The forks can be inverted to adjust the service range. The two front wheels measure 2 inches in diameter and swivel for maneuverability. The two rear wheels measure 8 inches in diameter. A foot brake keeps the lift truck from rolling. Two loading wheels near the top of the frame allow the lift truck to be loaded into a truck bed for transport. This material lift has a load capacity of 500 lb., weighs 136 lb., and measures 68 x 24 x 35 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It has a service range of 23-1/2 to 68-7/8 inches high with the forks up and 3-1/2 to 47-1/4 inches high with the forks down. Each fork measures 1-3/4 x 4 x 22 inches (H x W x D). The width between the forks is...

  • Brand: Vestil
  • ASIN: B0027Y76VI
  • UPC: 691215002219
 - Pair (2 keys) Keyman Genie Lifts Keys-Ignition Key for Bobcat, Genie, Skyjack, Snorkel, Upright, Terex, Part Number RONIS 455
Pair (2 keys) Keyman Genie Lifts Keys-Ignition Key for Bobcat, Genie, Skyjack, Snorkel, Upright, Terex, Part Number RONIS

Pair (2 keys) Keyman Genie Lifts Keys-Ignition Key for Bobcat, Genie, Skyjack, Snorkel, Upright, Terex, Part Number RONIS 455

  • Brand: Keyman
  • ASIN: B01H43QV9O
 - Forklift Heavy Equipment/Construction Ignition Key Set
Forklift Heavy Equipment/Construction Ignition Key

This key set works with the following FORKLIFT equipment. It also works on several other makes of machines. KOMATSU CLARK, YALE, HYSTER LINDE CATERPILLAR CLARK TOYOTA (OLDER AND NEWER) NISSANS (OLDER AND NEWER) DAEWOO/DOOSAN This key also comes with a color printed guide to help you select the key that you require. Comes fully assembled onto a heavy duty split key ring that will allow you to add or remove keys.

  • Brand: TORNADO HEAVY EQUIPMENT PARTS
  • ASIN: B071ZZ3XF7
  • UPC: 852032007997
 - Pake Handling Tools - Electric Work Positioner Lift Truck, 220 lbs Capacity
Pake Handling Tools - Electric Work Positioner Lift Truck, 220 lbs

Convenient, battery-operated lift is easy to transport around the job site. Includes 110VAC charger, push-button control pad with digital display, and detachable control wand. Platform Size: 18-1/2''* 23-5/8'' Recommend to use in S3 - Intermittent periodic duty

  • Brand: Pake Handling Tools
  • ASIN: B0752F3ZTX
  • UPC: 850111008071
 - Sumner 2118 Series 18-Feet Contractor Lift
Sumner 2118 Series 18-Feet Contractor

432-783651 Features: -Compact storage. -Fast action stabilizer legs. -No loose tools or hardware to worry about. -Reversible forks for added height. -Sumner-built winch. -Wt. Cap.: 650 lb. Product Type: -Furniture dolly. Weight Capacity: -650 Pounds. Frame Material: -Metal. Foldable: -Yes. Handles Included: -Yes. Wheels Included: -Yes. Dimensions: -Lockable 5'' casters. Overall Product Weight: -252 lbs. Overall Height - Top to Bottom: -216".

  • Brand: Sumner
  • ASIN: B001HW6Q30
  • UPC: 661165836516
 - Genie Lift, GL- 8, Heavy-Duty Aluminum Manual Lift, 400 lbs Load Capacity, Lift Height 10' 0.5
Genie Lift, GL- 8, Heavy-Duty Aluminum Manual Lift, 400 lbs Load Capacity, Lift Height 10'

Capacity of 400 lb (181 kg) for lifting heavy loadsLift weighs 145 lbs (65.8 kg) for compact and portable transport Single door access for ease of use The Genie GL-8 is a material lift that can be used as a hand truck, forklift, or dolly. The telescoping aluminum frame makes the lift compact and lightweight, while steel forks make the lift more durable. The lift has a 10' .5" (3.06 m) maximum lifting height and a 400 lb (181 kg) capacity for lifting and moving heavy items.Protects Flooring with Non-Marking Wheels and Dual Swivel CastersIt comes with non-marking 2" (5 cm) dual wheel front swivel casters, and 8" (20 cm) rear wheels for protecting floors when transporting items.Designed for Easy Maneuverability and StorageThe lift has a hold-down bar to secure the aluminum mast during transport, and can fit through most standard doorways. Lifting power is provided from a standard winch, which is reversible for compact storage.About Material LiftsMaterial lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.About Genie Industries Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a p...

  • Brand: Genie
  • ASIN: B004QTPJIY
 - Genie Battery Charger 105739
Genie Battery Charger 105739

Charger

  • Brand: MRK SALES
  • ASIN: B010ODJ3Q4
 - Genie Lift, GL- 10, Straddle Base, Heavy-Duty Aluminum Manual Lift, 350 lbs Load Capacity, Lift Height 11' 8
Genie Lift, GL- 10, Straddle Base, Heavy-Duty Aluminum Manual Lift, 350 lbs Load Capacity, Lift Height 11' 8" from Ground

Winch handle and standard steel forks for lifting load to a maximum height of 11' 8" (3.56 m)Capacity of 350 lbs (159 kg) for lifting heavy loadsLift weighs 161 lbs (73 kg) for portability The Genie GL-10 is a material lift, with a straddle base that adjusts to accommodate loads or fixed objects up to 35" (88.9 cm) wide, that can be used as a hand truck, forklift, or dolly. The telescoping aluminum frame makes the lift compact and lightweight, while steel forks make the lift more durable. The lift has a 11' 8" (3.56 m) maximum lifting height and a 350 lbs (159 kg) capacity for lifting and moving heavy items.Protects Flooring with Non-Marking Wheels and Dual Swivel CastersIt comes with non-marking 2" (5 cm) dual wheel front swivel casters, and 8" (20 cm) rear wheels for protecting floors when transporting items.Designed for Easy Maneuverability and StorageThe lift has a hold-down bar to secure the aluminum mast during transport, and can fit through most standard doorways. Lifting power is provided from a standard winch, which is reversible for compact storage.About Material LiftsMaterial lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.Abo...

  • Brand: Genie
  • ASIN: B004QTPJKW
 - Sumner Manufacturing 784750 2412 Contractor Lift, 12' Height, 400 lb. Capacity
Sumner Manufacturing 784750 2412 Contractor Lift, 12' Height, 400 lb.

Sumner's Contractor Lift is a super compact, versatile lift perfect for HVAC contractors, electrical contractors, industrial maintenance, steel erectors and facility management.

  • Brand: Sumner Manufacturing
  • ASIN: B004VTY88G
  • UPC: 661165847505
 - Genie Lift, GL- 12, Straddle Base, Heavy-Duty Aluminum Manual Lift, 350 lbs Load Capacity, Lift Height 13' 9.5
Genie Lift, GL- 12, Straddle Base, Heavy-Duty Aluminum Manual Lift, 350 lbs Load Capacity, Lift Height 13' 9.5" from Ground

Winch handle and standard steel forks for lifting loads to a maximum height of 13' 9.5" (4.20 m)Capacity of 350 lb (159 kg) for lifting heavy loadsLift weighs 176 lbs (79.8 kg) for portability The Genie GL-12 is a material lift, with a straddle base that adjusts to accommodate loads or fixed objects up to 35" (88.9 cm) wide, that can be used as a hand truck, forklift, or dolly. The telescoping aluminum frame makes the lift compact and lightweight, while steel forks make the lift more durable. The lift has a 13' 9.5" (4.20 m) maximum lifting height and a 350 lbs (159 kg) capacity for lifting and moving heavy items.Protects Flooring with Non-Marking Wheels and Dual Swivel CastersIt comes with non-marking 2" (5 cm) dual wheel front swivel casters, and 8" (20 cm) rear wheels for protecting floors when transporting items.Designed for Easy Maneuverability and StorageThe lift has a hold-down bar to secure the aluminum mast during transport, and can fit through most standard doorways. Lifting power is provided from a standard winch, which is reversible for compact storage.About Material LiftsMaterial lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use on...

  • Color: Blue and Aluminum
  • Brand: Genie
  • ASIN: B004QTPJLG
 - Goplus Hydraulic Scissor Lift Table Cart Dolly Scissor Jack Hoist Stand 500LB Capacity W/Foot Pump
Goplus Hydraulic Scissor Lift Table Cart Dolly Scissor Jack Hoist Stand 500LB Capacity W/Foot

Description This is our 500 lbs heavy duty rolling table cart. This Scissor Lift Cart with Hydraulic Foot Pump can position and raise work pieces up to 27-1/2 inches by simply pumping the convenient foot pedal. Lowering is easy too with a hand lever for controlled release. This handy table cart features a heavy duty oil resistant rubber mat to prevent slippage and two locking swivel casters for easy maneuverability. With four wheels, you can move this Hydraulic Cart easily. Do not hesitate to buy one!SpecificationsColor: gray.Size of rubber platform: 27 3/4" x 17 3/5"(LXW)Diameter of wheels: 4"Max lift height: 27-1/2"Min lift height (in.) 8-1/8 "Weight capacity: 500lbsItem weight: 98 lbsPackage include: 1 x Hydraulic lift table

  • Color: Black
  • Brand: Goplus
  • ASIN: B01N8XO8FG

Genie Lift Truck - Online Shop Results - Showing more then 46 results at ShopWorldlux.com

Promotions on Genie Lift Truck, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: White Inkjet Printer, Tigers Billiard Pool Table Light, and Sagaform Green

Looking for more Genie Lift Truck similar ideas? Try to explore these searches: Wii Game Case, Beaded Cap Sleeve Silk Dress, and Daisy Bed Canopy.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.