Compare Prices

Gate Roller DEALS

 - 4PC Set Chain Link Nylon Cantilevered Gate Rollers 4
4PC Set Chain Link Nylon Cantilevered Gate Rollers 4" post & 2-3/8" Gate

This is an ideal set of 4 Gate Rollers for any type of Chain Link Gate. With its Industrial/Commercial grade metal and finish, you will be sure to have your Chain Link Gate operate according to your needs and as it should. This set comes with 4pcs Gate Roller and includes all the necessary screws, studs, bolts for your Gate."

  • Brand: XCEL Fence
  • ASIN: B01D981D8C
  • UPC: 603404091690
 - RWM Casters VIR-0415-08 4
RWM Casters VIR-0415-08 4" Diameter X 1-1/2" Width Cast Iron V-Groove Wheel with Straight Roller Bearing, 700 lbs

RWM V-Groove wheels are high strength cast iron (VI) castings or forged steel (VF) forgings machined with a 90 degree groove for operation on an inverted angle iron track. Care must be made to assure the inverted angle iron track is parallel to ensure smooth and constant tracking. In some cases it may be advisable to run inverted angle iron on one side with V-Groove wheels and flat bar stock steel on the other side with a flat faced cast iron or forged steel wheel. V-Groove Wheels are used to control the flow of a load, i.e., into an oven, between machines, over long distances or where "production line" sequence is required. Bore is available in various sizes on some wheels and Keyways can be installed on most sizes.

  • Color: Black
  • Brand: RWM Casters
  • ASIN: B00426CJZW
 - Slide Gate Guide Roller L Rear Post Bracket Universal Heavy Duty Adjustable Dual Nylon Rollers Gate Support Assembly for Sliding Rolling Gates - Eagle Guide Rollers (6
Slide Gate Guide Roller L Rear Post Bracket Universal Heavy Duty Adjustable Dual Nylon Rollers Gate Support Assembly for Sliding Rolling Gates - Eagle Guide Rollers

  • Brand: Eagle Access Control Systems
  • ASIN: B07TD9QW18
  • UPC: 301637950042
 - Shepherd Hardware 9785 9785E Spring Loaded Gate Caster, 4-Inch, Black
Shepherd Hardware 9785 9785E Spring Loaded Gate Caster, 4-Inch,

The Shepherd 4 in. Gate Caster with Adjustable Spring Bracket is designed to allow gates to open and close freely. It features a 125 lb. load rating and a spring-loaded clamp that acts as a shock absorber when the caster is rolling over rough or uneven surfaces. It also features a universal mount for wood or metal gates.

  • Color: Black
  • Brand: Shepherd Hardware
  • ASIN: B000I1A8H6
  • UPC: 039003097854
 - Rolling Gate Track Wheel for Sliding Chain Link Fence Heavy Duty Cast Iron Wheel with Galvinized coating, Rear Roller Guide with Hardware
Rolling Gate Track Wheel for Sliding Chain Link Fence Heavy Duty Cast Iron Wheel with Galvinized coating, Rear Roller Guide with

Chain link gate rear wheels are support wheels used on residential, commercial, and industrial chain link fence projects. Rolling gate rear wheels are galvanized and include necessary bolt and nut for securing to rear wheel gate bracket. One, or multiple rear wheels, are used on chain link rolling gates. Size, weight, and design of gate will affect how many rear wheels to use. The 'leading edge,' or latch side, of rolling gates are supported either by single or double wheel carriers. The rear of the sliding gate rests on the rear wheels and 1-5/8" or 2" pipe track. Pipe track is suspended between adjacent fence line posts with track brackets.

  • Color: Galvanize
  • Brand: L.A. Ornamental
  • ASIN: B00P24GEWW
  • UPC: 767654813003
 - (2) Chain Link Rolling Gate NYLON TRACK ROLLERS: 2
(2) Chain Link Rolling Gate NYLON TRACK ROLLERS: 2" x 1-5/8" Track Wheels (includes rolling gate wheel mounting bracket as seen in picture). For chain link Roll Gates or sliding

Chain Link NYLON Rolling Gate Track Roller Track Wheel Rolling/Sliding Gate Rear Track Roller for 2" (1-7/8")¬Gate Frame & 1-5/8" Track Pipe. ¬High Quality Ball Bearings¬Provide¬Smooth Operation. *This set has Nylon Rollers for less friction and less bind! They are also the safety track wheel type with the retainer to help the gate to stay on track. Track Wheel fits a 1-5/8" Track Pipe and a 1-7/8" Chain Link Fence Gate Frame. Commercial/Industrial Strength Rolling/Sliding Gate Rollers. ¬Manufacturer's Lifetime Warranty. Each rolling chain link gate will require 2 of these Track Wheels, 6 track brackets, and a wheel carrier for the outer end of the gate. This listing is for a 2 PACK of the Nylon Track Wheel.

  • Brand: Jake Sales
  • ASIN: B011JF6LWA
  • UPC: 646437285452
 - 6
6" ROLLING GATE CARRIER WHEELS: for chain link fence rolling gates - rut

6" Rolling Gate Carrier Wheels (aka Double Wheel Carriers) 7" Between Tires on Carrier (fits chain link gates 1-3/8", 1-5/8", 1-7/8" (2")) Rubber Tires, Metal Carriage 9/16" axle diameter Some assembly required

  • Brand: FenceSmart4U
  • ASIN: B01E7Z8JQ0
  • UPC: 603404091638
 - 4
4" Cast Iron V Groove Wheel Cover Box Roller Bearing Residential Rolling

4" Cast Iron V Groove Wheel Cover Box Roller Bearing Residential Rolling Gates

  • Brand: Bobco Metals
  • ASIN: B00XWT3BBQ
  • UPC: 737534377222
 - Gate Guide Adjustable - Smooth Black Nylon Double Roller & Durable Zinc Plated 90° L Wall Mounting Bracket for Sliding Gates and Rolling Doors - The Hardware Mart (20013)
Gate Guide Adjustable - Smooth Black Nylon Double Roller & Durable Zinc Plated 90° L Wall Mounting Bracket for Sliding Gates and Rolling Doors - The Hardware Mart

This Gate Guide is fully adjustable for fast and easy installation. With both horizontal and vertical adjustment options you have multiple choices to fit any gate or sliding barn door. This ensures effortless setup of your gate guide. The dual black nylon rollers balance the gate and rotate smoothly so the gate can glide through, keep your sliding door, gate or barn door on track during opening and closing. Each roller can be individually adjusted to suit the width of your gate. Once in place tighten the supplied nuts to securely fasten the stabilizing rollers in place. The 90-degree bracket is constructed out of durable zinc plated steel with holes pre-drilled ready for quick and hassle-free bolt on mounting. Dual mounting points securely lock this unit down into place. Two black polyethylene caps finish off the look of this unit, matching the black nylon rollers to give your gate a sleek modern look. This gate roller guide comes pre-assembled for your convenience and the quickest installation.

  • Color: Zinc Plated
  • Brand: THE HARDWARE MART
  • ASIN: B07S8M5VYB
 - Sliding, Rolling Gate Guide Roller Black UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket ( Bracket to Bracket measures 3
Sliding, Rolling Gate Guide Roller Black UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket ( Bracket to Bracket measures

These are rollers to mount horizontally on both sides of a gate to help stabilize it from tipping over. They are sold individually but a pair would be required for true stabilization. They are made of rubberized UV protected hard plastic. Designed to stand up to the rigors of even the most extreme climates - these rollers will last for years and are maintenance free due to the internal sealed ball bearings. You can affix them to posts next to your gate via welding or bolting. NOTE: 2 ARE NEEDED

  • Color: Black
  • ASIN: B0052390EM
  • UPC: 786956743856
 - Sliding Gate Top Guide Roller Pair 3
Sliding Gate Top Guide Roller Pair 3" Hard Rubberized W/Weld On Mounting

One Pair Of Sliding Gate Top Guide Roller 3" Hard Rubberized With 1 3/8" x 1/8" Steel Weld On Mounting Bracket These Guide Rollers Use Sealed Ball Bearings Top & Bottom For Smooth Operation With Minimum Lubrication Top Guide Rollers are used for the inside & outside of a sliding gate to support the top of the gate and keep it upright. They allow smooth operation of the sliding gate as it rolls between the guide rollers. Premium quality guide rollers allow smooth operation with no squeaking, squealing, bouncing or vibration of gate, and are extremely important to the smooth operation of any electrically operated sliding gate (as are good quality v-groove wheels). Guide rollers like any moving part, must be occasionally lubricated with a light spray lube depending on the amount of operations the gate has per day (usually once a year would be adequate). Each guide roller measures 3" in length x 2 3/8" in diameter, with the bracket and axle bolts assembled it measures 4 5/8" long x 3" total space from the mounting post to the gate. Since the axle bolt has myloc nuts on both ends it can be removed from the top or the bottom for replacement purposes. Item includes: 2 = 3" x 2 3/8" Hardened rubberized guide roller with sealed ball bearings top & bottom 2 = 1 3/8" x 1/8" x 3 1/2"" long s...

  • Brand: UNB
  • ASIN: B01IUV4AOW
  • UPC: 721227206845
 - Sliding, Rolling Gate Guide Roller Black UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket 6
Sliding, Rolling Gate Guide Roller Black UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket

These are rollers to mount horizontally on both sides of a gate to help stabilize it from tipping over. They are sold individually but a pair would be required for true stabilization. They are made of rubberized UV protected hard plastic. Designed to stand up to the rigors of even the most extreme climates - these rollers will last for years and are maintenance free due to the internal sealed ball bearings. You can affix them to posts next to your gate via welding or bolting. NOTE: 2 ARE NEEDED

  • ASIN: B00523898K
  • UPC: 786956743887
 - 2Pcs/Set 2
2Pcs/Set 2" V Type Sliding Gate Roller V Groove Wheel Track Rail for Sliding Gate

Description: This Sliding Gate Roller is made of steel material, water proof, corrosion resistance and have long life. It adapts to a wide temperature range, can be used in the range of -40 ℃ -100 ℃. Specification: Condiiton: 100% Brand New Color: As picture shown Material: Steel Steering: Directional casters Groove: V Groove Wheel diameter: 49mm Slot width: 19mm Groove depth: 10mm Base plate size: 38mm x 68 mm / 1.50" x 2.68" (appr.) Mounting distance: 24mm x 55mm / 0.94" x 2.17" (appr.) Package Included: 2 x Sliding Gate Roller Steel V Type Wheel w/ Bracket Notice: Please allow 1-3cm error due to manual measurement and thank you for your kind understanding.

  • Color: As picture shown
  • Brand: Yosoo
  • ASIN: B075H7V3T9
  • UPC: 736691507619
 - Pressed Steel Pipe Track Roller with Retainer 5
Pressed Steel Pipe Track Roller with Retainer 5" x

Pressed steel pipe track roller with retainer 5" x 1-5/8".

  • Brand: FenceSmart4U
  • ASIN: B01N06KDN0
  • UPC: 603404090969
 - 4 pack--4
4 pack--4" V Groove Wheel Double Bearing Sliding Gate 3000 Lbs Roller

Completely sealed bearings require no lubrication, machined from high-quality cold rolled steel, zinc plated riveted will not come loose, self-cleaning relief groove, can be used with any steel wheel assembly for the best in quality. Recommended for Residential, Commercial and Industrial use.

  • Brand: Tamsmart
  • ASIN: B00UMD31QK
  • UPC: 852661458832
 - Sliding, Rolling Gate Guide Roller White UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket 6
Sliding, Rolling Gate Guide Roller White UHMW Rollers Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket

These are rollers to mount horizontally on both sides of a gate to help stabilize it from tipping over. They are sold individually but a pair would be required for true stabilization. They are made of rubberized UV protected hard plastic. Designed to stand up to the rigors of even the most extreme climates - these rollers will last for years and are maintenance free due to the internal sealed ball bearings. You can affix them to posts next to your gate via welding or bolting. NOTE: 2 ARE NEEDED

  • Color: White
  • Brand: Eaglr
  • ASIN: B00BHNMO9Y
  • UPC: 852873001819
 - Pressed Steel Rear Track Roller Guide Roller Light Duty Chain Link Gates 1-5/8
Pressed Steel Rear Track Roller Guide Roller Light Duty Chain Link Gates

Pressed Steel Rear Track Roller Guide Roller Light Duty Chain Link Gates 1-5/8" Pipe Track Rollers - Single Bearing with Heavy Bracket Universal Holding Bracket Assembly for 1-5/8" or 1-7/8" Frame

  • Brand: FenceSmart4U
  • ASIN: B01E9EOYUO
  • UPC: 603404091652
 - Slide Gate Guide Post Rollers 3
Slide Gate Guide Post Rollers 3" Black L Rear Adjustable Bracket Mount Double Hard Nylon Rollers Heavy Duty Steel Gate Guider Support Assembly for Sliding Rolling

  • Color: Black
  • Brand: Eagle Access Control Systems
  • ASIN: B07TD6TFVP
  • UPC: 301637950110
 - CNBTR M12 50 x 70mm PP Steel Roller Bearing Guiding Wheel with 6201 Bearing Insert for Electric Gate Pack of 2
CNBTR M12 50 x 70mm PP Steel Roller Bearing Guiding Wheel with 6201 Bearing Insert for Electric Gate Pack of

Specifications: Material: PP + Steel Color: Yellow + Silver Brand name:CNBTR Wheel Size: approx 50 x 70mm/1.97 x 2.76"(Dia x H) Total Height: approx 107mm/4.21" Screw Type: M12 Weight: 502g Features: 1.Used as Electric door upper wheel,panning door nylon clamp wheel,iron gate wheel,electric door guide whee,track wheel and pulley 2.Made of PP Steel and durable 3.With two 6201 bearings Insert 4.Great replacements for the damaged or old one Package include: 2 x Guiding Wheels The unique MPN label on each inner package, which confirm it passed the quality inspection and it is genuine item sold from our shop. Please offer it to us when you need assistance.

  • Brand: CNBTR
  • ASIN: B073P31SY1
 - Sliding Gate Rollers, 2Pcs/Set 2
Sliding Gate Rollers, 2Pcs/Set 2" V Groove Wheel Track Rail V Type Door Hardware for Sliding Gate

Description: These pulleys can be bolted on or welded on, just take wheel out and installed it. There are two Sliding gate roller steel V-shaped wheel with bracket, Just meet your needs. It is made of steel materials, water proof, corrosion resistance and durable to use. Specifications: Condition: 100% Brand New Color: As picture shown Material: Steel Steering: Directional casters Groove: V Groove Wheel diameter: 49mm Slot width: 19mm Groove depth: 10mm Base plate size: 38mm x 68 mm / 1.50" x 2.68" (appr.) Mounting distance: 24mm x 55mm / 0.94" x 2.17" Package Include 2 x Sliding Gate Roller Steel V Type Wheel w/ Bracket

  • Brand: ROBTLE
  • ASIN: B07Q47XGYX
  • UPC: 703633128393

Gate Roller - Online Shop Results - Showing more then 14 results at ShopWorldlux.com

Promotions on Gate Roller, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Kenmore Washing Machine Pump, Patent Leopard, and Caramel Filled Milk Chocolate

Looking for more Gate Roller similar ideas? Try to explore these searches: Led Cool Lights, smh5 Helmet, and Figure 8 Rope Toy.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.