Compare Prices

Flagpole Trucks DEALS

 - Flagpole Revolving Truck Single Pulley Heavy Duty 1 1/4
Flagpole Revolving Truck Single Pulley Heavy Duty 1 1/4" NPT Spindle USA

Single Pulley Revolving truck is constructed of cast aluminum, with a 1-1/4" NPT Spindle for flagpoles with female fitting. Maximum flagpole diameter is 3 1/2". Aluminum pulley. 1/2"-13NC top threading for ornament. Made in the USA

  • Color: Silver
  • Brand: Flagpole Gear
  • ASIN: B07GT4WP3K
  • UPC: 644287943768
 - Aluminum Revolving Flagpole Truck - Single Pulley - MADE IN USA
Aluminum Revolving Flagpole Truck - Single Pulley - MADE IN

Cast aluminum construction with a 2" outside diameter nylon pulley on a 1/4" stainless steel axle, this truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle and it is then secured to the truck with a stainless steel set screw. These trucks utilize self-lubricating ball bearing assemblies for ease of rotation, product life and strength. Maximum halyard diameter is 5/16". Fits COMMERCIAL grade flag poles with up to a 3 1/2 " outside diameter.

  • Brand: eder products
  • ASIN: B00NEROW82
  • UPC: 844560040140
 - Flagpole truck RTC-1-238 (Cap Style) for 2-3/8 top - Satin Finish
Flagpole truck RTC-1-238 (Cap Style) for 2-3/8 top - Satin

Silver aluminum single pulley revolving truck assembly model RTC-1-238 for ground set flagpoles with a 2-3/8 inch top diameter. This cap style truck assembly has three stainless steel set screws to secure it to the flagpole and a 1/2-13NC spindle thread to accept a top ornament with matching thread pattern. Maximum halyard diameter to use with this truck is 5/16. (Made in the U.S.A.)

  • Color: Satin (Brushed)
  • Brand: Eder Flag
  • ASIN: B004EPMOOW
  • UPC: 719611233522
 - Revolving Flagpole Truck 3-1/2
Revolving Flagpole Truck 3-1/2" Flagpole Diameter 1-1/4" NPT Spindle Machined Aluminum

Silver Cast Aluminum External Halyard Revolving 1-1/4 Inch NPT Treading Spindle Single Pulley Can Mount On Top Of A Flag Pole Up to 3-1/2 Inches Top Diameter - 1-1/4" NPT Treading Spindle Truck Is Made In America. 1-1/4" NPT Flag Pole Truck. Construction of this revolving flag pole truck: cast aluminum. The pulley is 1-1/2" outside diameter machined aluminum spins on a 1/4" stainless steel axle. Most flagpole trucks have a cast nylon pulley, this flagpole truck has a machined aluminum which is stronger and better. The pulley can handle a maximum halyard diameter of 5/16". Truck Spindle: 1-1/4 Inch NPT threading. Your flag pole can be up to 3-1/2 Inch outside top diameter. Flagpole must have a female fitting installed to accept the Truck Spindle: 1-1/4 Inch NPT threading. You can easily install an ornament on top of this external halyard stationary flagpole truck. Accepts spindle threading of 1/2"-13NC. We will also supply you with a stainless steel set screw to secure your ornament to the top. Movement: utilizes enclosed stainless steel bearings and raceway. Revolving Flagpole truck

  • Color: Silver
  • Brand: Eder Flag
  • ASIN: B01ICFJKM8
  • UPC: 646437090308
 - US Flag Store OTH Flagpole Truck for 20-Feet Online Stores Brand Flagpole
US Flag Store OTH Flagpole Truck for 20-Feet Online Stores Brand

Stationary Truck/Pulley. Cast aluminum construction with cast nylon pulley. Designed to fit Residential 2 inch diameter flagpoles. This flag pole truck will only fit the 20ft Online Stores brand flag pole.

  • Brand: US Flag Store
  • ASIN: B00ECGR3NU
  • UPC: 844560030516
 - Anley FlagPole Standard US Accessories - Sliver Cast Aluminum Truck with Nylon Pulley - Heavy Duty Flag Pole Halyard Stationary Truck - Fits 2
Anley FlagPole Standard US Accessories - Sliver Cast Aluminum Truck with Nylon Pulley - Heavy Duty Flag Pole Halyard Stationary Truck - Fits 2" Diameter FlagPoles, 0.4" Threaded

ANLEY FlagPole Standard Accessories - Sliver Cast Aluminum Truck with Nylon Pulley - Heavy Duty Flag Pole Halyard Stationary Truck - Fits 2" Diameter FlagPoles, 0.4" threaded rodPREMIUM QUALITYOur flagpole trucks are made of high-quality aluminum with cast nylon pulley. They are durable and non-rusting, you will be able to use it for a long time!EASY INSTALLATIONSimply adjust its position on the top of the flagpole and secure the screw. Also, it can easily be install an ornament on top of this external halyard stationary flagpole truck. Accepts spindle threading of 0.4"-13NC.STANDARD DESIGNThe inner diameter of the Truck is 2", it is designed to fit any flag pole that is 2" or less; The pulley is 0.5" outside diameter; The threaded spindle for the flag pole topper is 0.4" (the center hole of the truck), suitable for standard US flagpole top ornament.SPECIFICATIONSPackage contain 1 x Flag pole truck , 3 x stainless set screws. If you also wanna install a beautiful ornament on top of this flagpole truck. Do search for ANLEY Flagpole Gold Ball to find what you need.WARRANTYAll items from ANLEY INC come with 3-MONTH FREE replacement warranty. You can always contact us at: http://www.amazon.com/seller/ANLEY.

  • Color: Silver
  • Brand: Anley
  • ASIN: B07PQ5C8HH
 - 2 Inch Silver Cast Aluminum External Halyard Stationary Single Pulley Flagpole Truck
2 Inch Silver Cast Aluminum External Halyard Stationary Single Pulley Flagpole

This 2 Inch Silver Cast Aluminum External Halyard Stationary Single Pulley Flagpole Truck Can Mount On Top Of A Flag Pole Up To 2 Inches Top outside diameter. Flagpole Truck Is Made In USA. The pulley is 1-1/2" outside diameter made of cast nylon. Spins on a 1/4" stainless steel axle. The pulley can handle a maximum halyard diameter of 5/16". Truck is secured to the top of your outside diameter flagpole of 2 inches by a stainless steel set screw. You can easily install an ornament on top of this external halyard stationary flagpole truck. Accepts spindle threading of 1/2"-13NC. We will also supply you with a stainless steel set screw to secure your ornament to the top. Movement: This truck is stationary. This truck is made by Flags Poles And More. Our brand is printed on the product and/or packaging to help stop knockoffs.

  • Color: Silver
  • Brand: Flags Poles And More
  • ASIN: B019FX4RU6
 - Flagpole Truck Pulley and Gold Anodized Ball Ornament Topper Set Multiple Sizes (2
Flagpole Truck Pulley and Gold Anodized Ball Ornament Topper Set Multiple Sizes (2" Truck & 3" Gold

This set includes a sturdy cast aluminum cap-style stationary truck with metal pulley. The truck has three stainless steel inset screws for tightening onto pole, Trucks are sized by the maximum outside diameter of the flagpole (i.e., the 2" truck is only 2" on the inside). Truck is made in the USA. The gold anodized ball ornament has 1/2"-13NC rod. Sizing is the ball diameter and is imported.

  • Brand: Flagpole Gear
  • ASIN: B07MSL9XBG
  • UPC: 644287946707
 - Flagpole Truck Pulley 3
Flagpole Truck Pulley 3" Maximum Diameter, Stationary Cast Aluminum Made in The

Sturdy cast aluminum stationary flagpole truck. Fits a flagpole with a maximum 3" outside diameter (i.e. the inside of the truck is 3' and no more. Secures to flagpole with 3 stainless steel inset screws. Features a metal external pulley and threaded hole at top for 1/2" rod ornament. Ideal halyard size is 5/16" or smaller. Made entirely in the USA!

  • Color: Silver
  • Brand: Flagpole Gear
  • ASIN: B07GWX3BK3
  • UPC: 644287944864
 - Flagpole Stationary Truck Cap Style Metal Pulley USA Made 2
Flagpole Stationary Truck Cap Style Metal Pulley USA Made 2" 2 1/2" 3" 3 1/2" (2

Cast aluminum cap style stationary trucks with aluminum pulley. Sizing is by the maximum outside diameter that the truck can accommodate - the 2" truck is only 2" on the inside, so can only accept up to a 2" outside diameter flagpole, etc. Truck is secured to pole with 3 stainless steel inset screws. Maximum 5/16" halyard recommended. Accepts ornament spindle threading of 1/2"-13NC. *Please note, that if you are using pipe instead of a flagpole, pipes are measured by the interior space, not the actual outside diameter - please measure accordingly for the correct OUTSIDE diameter.* Made in the USA

  • Brand: Flagpole Gear
  • ASIN: B07GT65B5J
  • UPC: 644287943454
 - US Flag Store OT3 Flagpole Truck
US Flag Store OT3 Flagpole

Cast aluminum construction with a cast iron nylon pulley on 1/4" stainless steel axle, this Stationary Truck/Pulley is designed to slip over the top of the flagpole and be secured by stainless steel set screws. The top has been designed to accept an ornament with a spindle and it is secured to the truck with a stainless steel pan head screw. Maximum halyard diameter is 5/16". Designed to fit 3 inch diameter residential flagpoles.

  • Brand: US Flag Store
  • ASIN: B0014DP8Z4
  • UPC: 844560014233
 - Flagpole Revolving Truck Cap Style Single Pulley RTC 2
Flagpole Revolving Truck Cap Style Single Pulley RTC 2" 2 3/8" Made in The USA (Fits Maximum 2" Outside

Cap style revolving single pulley truck is made of cast aluminum, with cast nylon pulley wheel. Secures to pole with 3 stainless steel inset screws. Sized by outside diameter of flagpole - the 2" is exactly 2" inside, so will not fit a pole larger than 2" on the outside diameter. Top threaded hole allows for ornament with 1/2"-13NC standard threading rod. Made in the USA

  • Color: Silver
  • Brand: Flagpole Gear
  • ASIN: B07S1VXRN2
  • UPC: 644287945724
 - Flagpole truck RTC-1-2 (Cap Style) for 2
Flagpole truck RTC-1-2 (Cap Style) for 2" top - Satin

Silver aluminum single pulley revolving truck assembly model RTC-1-2 for ground set flagpoles with a 2 inch top diameter. This cap style truck assembly has three stainless steel set screws to secure it to the flagpole and a 1/2-13NC spindle thread to accept a top ornament with matching thread pattern. Maximum halyard diameter to use with this truck is 5/16. (Made in the U.S.A.)

  • Color: Satin (Brushed)
  • Brand: Eder Flag
  • ASIN: B004EPIHC0
  • UPC: 719611233515
 - Huouo Flagpole Truck for 2
Huouo Flagpole Truck for 2" Top - Cast Aluminum Stationary Single Pulley Assembly Truck Cap Style - Satin

  • Color: Silver
  • Brand: Huouo
  • ASIN: B07N3XS6FH
  • UPC: 608803776704
 - FanPole Flag Pole to Go for Trucks - Pole Mounts to Hitch
FanPole Flag Pole to Go for Trucks - Pole Mounts to

FanPole is the best flag pole for your Truck, SUV or RV and allows you to fly a full sized flag from your hitch receiver. We also show you that the most important things in your life are your team, your country, and breathing. This ain't your daddy's redneck flagpole strung together with chicken wire and used chew. This is high quality s. we're talking about. Is it legal? Of course it's legal. It should be illegal not to have one. Not only is it the most durable flag pole in the market but it's the easiest to use as well. It's so easy a Raiders fan could do it. Did we mention that it fits any size flag you have? Despite popular belief size does matter. Do you really feel comfortable rolling around with those small dinky plastic flags attached to your windows? Real Fans have Real Flags! HOW IT WORKS: STEP 1. Insert the hitch base into any standard sized receiver hitch. STEP 2. Use the receiver pin to lock the receiver base into place. Once you have put the receiver pin through your receiver and the provided hitch base, use the cotter pin to lock the receiver pin into place. STEP 3. Attach the upper pole to the lower pole, tighten using the FanPole Tool. (Make sure they are tight) STEP 4. Attach the Flag of your choosing (no raiders flags) to the clips on the upper pole. These atta...

  • Color: Black
  • Brand: FanPole
  • ASIN: B00MR1M166
  • UPC: 633556819507
 - Flagpole 2 1/2
Flagpole 2 1/2" Truck and 4" Gold Ball Ornament

This set includes a sturdy cast aluminum cap-style truck with metal pulley that fits a 2 1/2" outside diameter pole, The truck has three screws for tightening onto pole, Truck is Made in the USA. The gold anodized ball ornament is 4" in diameter and is imported.

  • Color: Silver and Gold
  • Brand: Flagpole Gear
  • ASIN: B01GI2OPG8
  • UPC: 644287943683
 - PISSION Flagpole Hardware Repair Kits - 3
PISSION Flagpole Hardware Repair Kits - 3" Gold Ball / 2pcs 46ft Flag Halyard Rope / 4" Cleat Hook / 4pcs Flag Clip Hooks/Hex Nuts/Flat Washers/Flagpole Truck for 2"

Packaged Content: 1x 3" Flagpole top ball 2x 46ft Flag Halyard Rope 1x 4" Cleat Hook 2x screws, 4x Flag Clip Hooks 1x Hex Nuts 1x Flat Washers 1x Flagpole Truck for 2" Top

  • Color: Hardware Repair Kits
  • Brand: PISSION
  • ASIN: B07L81M9P9
 - Flagpole truck OT1 (Cap Style) for 2-3/8
Flagpole truck OT1 (Cap Style) for 2-3/8" top - Satin

Silver aluminum single pulley stationary truck assembly model OT1 for ground set flagpoles with a 2-3/8 inch top diameter. This cap style truck assembly has three set screws to secure it to the flagpole and a 1/2-13NC spindle thread to accept a top ornament with matching thread pattern. Maximum halyard diameter to use with this truck is 5/16. (Made in the U.S.A.)

  • Color: Satin (Brushed)
  • Brand: Eder Flag
  • ASIN: B004EPB4LQ
  • UPC: 719611233041
 - US Flag Store OT25 Flagpole Truck
US Flag Store OT25 Flagpole

Cast aluminum construction with a cast iron nylon pulley on 1/4" stainless steel axle, this Stationary Truck/Pulley is designed to slip over the top of the flagpole and be secured by stainless steel set screws. The top has been designed to accept an ornament with a spindle and it is secured to the truck with a stainless steel pan head screw. Maximum halyard diameter is 5/16". Designed to fit 2 1/2" diameter residential flagpoles.

  • Brand: US Flag Store
  • ASIN: B0014DP8YA
  • UPC: 844560014226
 - HiTow Hitch Mount Flagpole Holder for 2
HiTow Hitch Mount Flagpole Holder for 2" Hitch Receivers Flag Travel, 8.5" or 11.5" Length Black

Specification: 8.5" or 11.5" usable length, Adjustable thumbscrew holds pole firmly in place, Holds flagpoles up to 2" diameter, Screw holds pole in place, durable and rust resistant; Come with 2pcs screws, Works great for those vehicles even with spare tire on the back, steady as a rock base for your flagpole (check size carefully if you could use it); Fits standard 2" hitch receivers, Added a screw hole below the flagpole holder for more stable grabbing, Fly flags from your trailer, The bottom is open allowing the pole to rest on the ground; Finished in black power coating provide durable and strong conditions, resist dust and corrosion; Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable; ABOUT US HiTow is a manufacturing enterprise specialized in the manufacturing and selling of sheet metal structures. We have a product R&D institution ,strict quality control group and specialized product testing equipment which quarantee the stable product quality control.  Our products are widely used in automobile, ATV, motocycle, our products are exported to North America,Australia and other regions.

  • Brand: HiTow
  • ASIN: B07RT6G4Q9
  • UPC: 765390183961

Flagpole Trucks - Online Shop Results - Showing more then 80 results at ShopWorldlux.com

Promotions on Flagpole Trucks, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Kit 4 Pot, 100w Rough Service Bulb, and Carpet Staplers

Looking for more Flagpole Trucks similar ideas? Try to explore these searches: Rgb Component Video Coupler, Rose Favors, and New York Mets Dog Jersey.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.