Compare Prices

Edelbrock Carburetor Installation DEALS

 - Edelbrock 1409 CARBURETOR
Edelbrock 1409 CARBURETOR

The Edelbrock Performer Series Marine Square Bore Air Valve Secondary Electric Choke New Carburetor features modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8 inch inverted flare fuel inlet fitting, tube in air horn for fuel pump vent, 5-1/8 inch flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance in marine applications. The Edelbrock square-bore carburetors are all-aluminum, ball-burnished and lightweight. There are no power valves to blow or plastic parts to break. The two-piece construction resists warping. Metering rods can be changed within seconds without carburetor removal. Their simple tub-type bowl and rear-pivot floats offer you trouble-free operation. The Edelbrock Performer warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B00062YA80
  • UPC: 085347014095
 - Edelbrock 1411 CARBURETOR
Edelbrock 1411 CARBURETOR

The Edelbrock Performer Square Bore Air Valve Secondary Electric Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in 402 CID and larger engines with the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer electric choke carburetor includes both timed and full vacuum ports for ignition advance. The carburetors use easily changed metering rods for precise tuning. The Edelbrock Performer covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B000182B9Y
  • UPC: 085347014118
 - Edelbrock 1806 Thunder Series AVS Carburetor
Edelbrock 1806 Thunder Series AVS

The Edelbrock Thunder Series AVS Carburetor is designed and calibrated to deliver optimum street performance. It comes with an added twist and a quick tune secondary air valve. This air valve can be easily adjusted to match your needs of having the secondaries kick in early or late. The air valve can be set using standard tools and no extra springs are needed. This CNC-profiled, ball-burnished aluminum carburetor features black accented hardware and throttle linkage. It includes smooth transition from part to full throttle with leak free operation. This carburetor sports a silver finish and a square bore flange with 4 barrels.

  • Brand: Edelbrock
  • ASIN: B000630G3C
  • UPC: 085347018062
 - Edelbrock 1805 Thunder Series 650 CFM Square Bore 4-Barrel Manual Choke New Carburetor
Edelbrock 1805 Thunder Series 650 CFM Square Bore 4-Barrel Manual Choke New

The Edelbrock Thunder Series AVS Carburetor is designed and calibrated to deliver optimum street performance. It comes with an added twist and a quick tune secondary air valve. This air valve can be easily adjusted to match your needs of having the secondaries kick in early or late. The air valve can be set using standard tools and no extra springs are needed. This CNC-profiled, ball-burnished aluminum carburetor features black accented hardware and throttle linkage. It includes smooth transition from part to full throttle with leak free operation. This carburetor sports a silver finish and a square bore flange with 4 barrels.

  • Brand: Edelbrock
  • ASIN: B000630G32
  • UPC: 085347018055
 - Edelbrock EDL-1826 Thunder Series 650 CFM Square Bore 4-Barrel Electric Choke New Carburetor
Edelbrock EDL-1826 Thunder Series 650 CFM Square Bore 4-Barrel Electric Choke New

The Edelbrock Thunder Series Electric Choke New Carburetor features unique AVS (Adjustable Valve Secondary), which allows simple and accurate tuning of the secondary circuit with simple hand tools while installed on the vehicle. The counterweighted secondary design utilizes a heavy, non adjustable counterweight that relies on the velocity of the air coming through the secondary venturis to roll open the secondary air door, thus helping to eliminate primary to secondary stumbles. The newly designed primary and secondary booster clusters offer the most accurate and up to date calibration available. The outside of the carburetor body is ball burnished for a bright finish. There are no gaskets below the fuel bowl level for a leak-free operation. The carburetor two-piece design makes it easy to change jets or adjust the floats. The needles, springs, jets and floats can be replaced and tuned without draining the fuel. Complete tuning can be done without removing the carburetor from the intake manifold.

  • Brand: Edelbrock
  • ASIN: B0009PAYJ8
  • UPC: 085347018260
 - Edelbrock 1801 Thunder Series AVS Carburetor
Edelbrock 1801 Thunder Series AVS

The Edelbrock Thunder Series AVS Carburetors blend air and fuel for an internal combustion, measures the airflow of the engine. They use all-aluminum for optimum cooling, metering rods for precise tuning and electric choke for heating up the engine. It includes qwik-tune secondary air valve for performance factor with fine tuning and no power valves for superior reliability. These come with silver-like finish.

  • Brand: Edelbrock
  • ASIN: B000VDLQB8
  • UPC: 085347018017
 - Edelbrock 8008 THROTTLE LINKAGE
Edelbrock 8008 THROTTLE

The Edelbrock Carburetor Stud Kit includes studs along with washers and nuts. These fasteners are made from steel and given a cadmium finish. The stud measures 1.38 in length and its thread size is 5/16-18. They are a standard length for installations without a spacer or adapter. The kit consists of 4 pieces each of washer, stud and nut. The nut features a standard hex style.

  • Brand: Edelbrock
  • ASIN: B000CN7134
  • UPC: 085347080083
 - Edelbrock 8723 CARBURETOR SPACER
Edelbrock 8723 CARBURETOR

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.

  • Brand: Edelbrock
  • ASIN: B003D2BXC6
  • UPC: 085347087235
 - Edelbrock 9266 GASKET
Edelbrock 9266 GASKET

The Edelbrock Heat Insulator Gasket is designed to prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed to extreme underwood temperatures. This is a 4-barrel gasket, which is made up of a nitrile rubber composite. It has a 2-hole divided center and is 0. 320 inch in thickness. This gasket comes with extended carburetor studs.

  • Brand: Edelbrock
  • ASIN: B00062YBPM
  • UPC: 085347092666
 - Edelbrock 2696 CARBURETOR ADAPTER
Edelbrock 2696 CARBURETOR

The Edelbrock Four-Hole Square-Bore to Spread-Bore Carburetor Adapter allows proper installation of carburetor to manifold. It mounts the Edelbrock square-bore carburetors to stock Quadra jet and Thermo-Quad manifolds. It is designed to replace the original equipment unit. It allows the use of almost any carburetor on almost any intake, saving the hassle and expense of purchasing all new components when changing carburetors or intakes.

  • Brand: Edelbrock
  • ASIN: B00062YACG
  • UPC: 647367202212
 - Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural Finish
Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural

Performer EPS Intake Manifold Installation KitSB-Chevy 1957-86Idle-5500 RPM RangeNon-EGR applications4-bbl square-bore carb flange Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold 350-2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to "up the standards" in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.Installation NotesPort Exit Dimensions: 1.15" x 1.87" Carb Pad Height: 4.27" Click here to determine carburetor pad height.Manifold Height: (A) 3.74" (B) 4.80"MANIFOLD INSTALLATION KITS INCLUDEKitPart #IntakeManifoldIntakeGasketIntakeBolt KitCarbStud KitCarbBase...

  • Brand: Edelbrock
  • ASIN: B0091V29H6
  • UPC: 008534720401
 - Edelbrock 1499 Lid Gaskets EPS Carburetor and Installation Kit Edelbrock Airhorn Gasket Set for Performer and Thunder Series Carbs (Qty 5)
Edelbrock 1499 Lid Gaskets EPS Carburetor and Installation Kit Edelbrock Airhorn Gasket Set for Performer and Thunder Series Carbs (Qty

Edelbrock replacement gaskets are made to our high standards of quality and performance. Theyre the same high quality gaskets that we supply with our intakes, heads, carbs and other components.

  • Brand: Edelbrock
  • ASIN: B001P2N8K6
  • UPC: 085347014996
 - Edelbrock 1721 FUEL PUMP
Edelbrock 1721 FUEL PUMP

The Edelbrock Performer Series Street Fuel Pumps are designed to match the Performer Series Carburetors. They have six valves and a free-flow capacity of 110 gallons per hour. The fuel pumps have a unique valve design that improves flow quantity and quality, and can support engines with up to 550 horsepower.

  • Brand: Edelbrock
  • ASIN: B000CN4ZY2
  • UPC: 085347017218
 - Edelbrock 2697 CARBURETOR ADAPTER
Edelbrock 2697 CARBURETOR

The Edelbrock Quadra jet and Thermo-Quad Adapter Kit includes fuel filter and rubber fuel lines with clamps. The Edelbrock adapter allows proper installation of carburetor to manifold. All parts needed to install the Edelbrock square-bore carburetors to stock Quadra jet and Thermo-Quad manifolds are included. It is designed to replace the original equipment unit. It allows the use of almost any carburetor on almost any intake, saving the hassle and expense of purchasing all new components when changing carburetors or intakes.

  • Brand: Edelbrock
  • ASIN: B00062YADA
  • UPC: 085347026975
 - Edelbrock 8126 FUEL LINE KIT
Edelbrock 8126 FUEL LINE KIT

The Edelbrock Fuel Line is specifically designed for Edelbrock square-bore carburetors. This fuel line is made of steel and comes with an elegant chrome finish. They feature 3/8 barbed end inlet and does not include fuel filters.

  • Brand: Edelbrock
  • ASIN: B0006303ZS
  • UPC: 085347081264
 - Edelbrock 1470 ACCELERATOR PUMP
Edelbrock 1470 ACCELERATOR

The Edelbrock Accelerator Pump Assembly Kit includes accelerator pump, spring and cup assembly. Accelerator pump assembly for #1400, #1403, #1404, #1405, #1406, #1805, #1806, #1825 and #1826.

  • Brand: Edelbrock
  • ASIN: B00062YA7G
  • UPC: 085347014705
 - Edelbrock 1221 AIR CLEANER
Edelbrock 1221 AIR CLEANER

The Edelbrock Signature Series Air Cleaner line coordinates perfectly with the Signature Series valve covers to make your engine special. Stamped from 18 gauge steel and triple chrome plated, the round air cleaners work with all popular 5-1/8" diameter carburetors. The 14" models have knockouts in the base and include an adapter for crankcase ventilation.

  • Brand: Edelbrock
  • ASIN: B000CNAO9W
  • UPC: 085347012213
 - Edelbrock 8089 FITTING
Edelbrock 8089 FITTING

The Edelbrock Carburetor Inlet Fittings are accessories which are used to install and tune Edelbrock carburetors. These fittings are manufactured from quality materials to suit your carburetor needs. The fitting is made of brass. The size of the fitting is 5/8-20 and 3/8 with male threads. This fitting can be rotated 360 degrees and allows you to aim your fuel inlet towards the front or rear of the carburetor for clearance under a drop base air cleaner.

  • Brand: Edelbrock
  • ASIN: B000CNAU6E
  • UPC: 085347080892
 - Edelbrock 8008 Carburetor Stud Kit, Model: 8008, Car & Vehicle Accessories / Parts
Edelbrock 8008 Carburetor Stud Kit, Model: 8008, Car & Vehicle Accessories /

The Edelbrock Carburetor Stud Kit includes studs along with washers and nuts. These fasteners are made from steel and given a cadmium finish. The stud measures 1.38 in length and its thread size is 5/16-18. They are a standard length for installations without a spacer or adapter. The kit consists of 4 pieces each of washer, stud and nut. The nut features a standard hex style.

  • Brand: Auto Supply Mall
  • ASIN: B01ETHMCA0
 - Edelbrock 8716 CARBURETOR SPACER
Edelbrock 8716 CARBURETOR

The Edelbrock Standard-Flange Carburetor Adapter allows using almost any carburetor on almost any intake, saving the hassle and expense of purchasing all new components when changing carburetors or intakes. This carburetor adapts a square flange carburetor base to a 4500 series (Dominator) manifold flange. The thickness of this adapter is 2. 00. The carburetor adapters allow proper installation of carburetor to manifold.

  • Brand: Edelbrock
  • ASIN: B00062YC9W
  • UPC: 085347087167

Edelbrock Carburetor Installation - Online Shop Results - Showing more then 89 results at ShopWorldlux.com

Promotions on Edelbrock Carburetor Installation, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Series Auxiliary Audio, Casino Ashtray, and Ivory Base

Looking for more Edelbrock Carburetor Installation similar ideas? Try to explore these searches: Gray Green Lens, Morgan Union Suit, and Cavalier King Charles Spaniel Breed.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.