Compare Prices

Dive Rite Hose DEALS

 - Dive Rite Hose Retainer, Deluxe Large
Dive Rite Hose Retainer, Deluxe

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly.Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1" x 2" (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks. Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.

  • Brand: Dive Rite
  • ASIN: B00L7DJONS
  • UPC: 687965591875
 - Dive Rite Hose Clip Retainer Bungee with Tab to Secure Your Gauges or Regulators for Scuba Diving
Dive Rite Hose Clip Retainer Bungee with Tab to Secure Your Gauges or Regulators for Scuba

Hose Clip Retainer replaces the need for cable ties, O-rings or cave line. Attach clips to regulator and SPG hoses. Simply pass the bungee through the clip opening, around the hose, and over the tab. This connection is secure but can still be easily removed for reconfiguring. If you don't have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light. Simply thread the bungee loop through the eyelet of a snap, stretch around the hose, and bring the bungee loop over the tab. Keep a dozen of these in your dive kit; you'll be surprised how quickly your dive buddies "borrow" them never to return.

  • Brand: Dive Rite
  • ASIN: B009M78RO8
 - Dive Rite Hose Retainer, Deluxe Small
Dive Rite Hose Retainer, Deluxe

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly.Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1" x 2" (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks. Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.

  • Brand: Dive Rite
  • ASIN: B00L7DJN2K
  • UPC: 687965592278
 - Dive Rite Braided Low Pressure Hose 22
Dive Rite Braided Low Pressure Hose 22"

Durable braided low pressure hose, HS-PVC inner tube/Polyester reinforcing/48 strands braided polyester outer layer, Working pressure 1,500 psi, Burst pressure 6,000 psi

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B07R1JRM7V
  • UPC: 879642009609
 - Dive Rite Travel EXP Wing ({25 lb | 11.3 kg} Lift) w/Remote Exhaust & 16-in Hose
Dive Rite Travel EXP Wing ({25 lb | 11.3 kg} Lift) w/Remote Exhaust & 16-in

The Travel EXP is part of Dive Rite's innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single tank diving. The donut-style provides an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim. The Travel EXP wing comes complete with LP hose, LP Inflator and corrugated hose.

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B001V1XNIS
 - Dive Rite Hose Retainer, EPDM Large
Dive Rite Hose Retainer, EPDM

Tried and true EPDM hose retainers with modern twist.The Dive Rite EPDM Hose Retainers are a must have for any stage, deco, or sidemount bottle rigging. Using the proven durability of EPDM rubber, these 1" wide hose retainers will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer. EPDM rubber maintains its elasticity thru extreme heat and cold, and will not slip on your cylinder when a hose is being stowed or deployed. A nylon pull tab makes it easy to stretch the hose retainer, even with gloves. Small size hose retainer (GM2051-Small) will work on cylinders 5.5" down to 4" diameter, large size hose retainer (GM2051-Large) will work on 6.9" thru 8" diameter cylinders.TECHNICAL DETAILS EPDM rubber 1? (2.54cm) wide band 2? (5.08cm) Nylon pull tab Large: 1.2 oz (34 g) Small: 1 oz (28.35 g)In the package: 1 EPDM Band of your choice.

  • Brand: Dive Rite
  • ASIN: B01915W1O2
  • UPC: 692764496696
 - Dive Rite Corrugated Hose BCD Assessories 16
Dive Rite Corrugated Hose BCD Assessories

Merchandise, made by Dive Rite. It is a Corrugated Hose, BCD Assessories . It is a size 16". The package weight is approx 12 ounces.

  • Brand: Dive Rite
  • ASIN: B003EMRRFW
  • UPC: 879642004581
 - Dive Rite O2 Deco Regulator
Dive Rite O2 Deco Regulator

The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional preparation. An unbalanced piston DIN first stage gives ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1" diameter button guage. The XT2 second stage is a pneumatically balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation. User adjustability on the second stage lets the divers tune the inhalation setting to match personal preference. An orthodontic mouthpiece reduces jaw fatigue on longer deco obligations. A 40" green low pressure hose and green faceplate on the second stage come standard to indicate oxygen use. Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator. Note: The Oxygen Deco Regulator is not intended for use deeper than 50 ft (15m) on appropriate gas mix. Technical Details First Stage Unbalanced piston 1" ...

  • Color: Green
  • Brand: Dive Rite
  • ASIN: B00HZZ64Z8
  • UPC: 879642002815
 - Dive Rite XT2 Second Stage Only (No Hose) - Right Hand
Dive Rite XT2 Second Stage Only (No Hose) - Right

The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT2's advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT1 performs right alongside premier regulators on the market today. The second stage regulator ha an ergonomic dive/pre-dive Venturi lever that is easy to adjust even with thick gloves. The Venturi lever prevents regulator free flow. Second stage uses a pneumatically balanced downstream valve, which provides better performance at depth. The second stage has an external adjustment knob to adjust the valve to fine tune inhalation effort. The second stage housing and cover are manufactured from durable impact resistant ABS plastic with chromed brass adjustment knob and barrel tube. The spring and lever are stainless-steel and the second stage comes standard with Teflon coated internal parts, which makes it cold-water ready. The second stage regulator is available in a right or left-hand configuration for hose routing and dive equipment set-up requirements. The XT2 Second-Stage is Nitrox ready out of the box.

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B00C8QX08I
  • UPC: 879642003201
 - Dive Rite Inflator Hose 40
Dive Rite Inflator Hose 40"

Merchandise, made by Dive Rite. It is a Inflator, Hose . The product's color is Black. It is a size 40". The package weight is approx 13 ounces.

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B07RC62S45
  • UPC: 879642002044
 - Dive Rite SPG, Boot w/{32 in | 81 cm} Hose in PSI
Dive Rite SPG, Boot w/{32 in | 81 cm} Hose in

Dive Rite SPG, Boot w/{32 in | 81 cm} Hose in PSI - Dive Rite offers the { 2 in | 5 cm } diameter "brass & glass" Dive Rite Tech gauge with { 1.75 in | 4.5 cm } white face in PSI and configured in an individual boot with a {32 in | 81 cm} high-pressure rubber hose and swivel spool.

  • Brand: Dive Rite
  • ASIN: B01B818E7K
 - Dive Rite Hi Pressure SPG Hose 6
Dive Rite Hi Pressure SPG Hose

Merchandise, made by Dive Rite. It is a Hi Pressure SPG, Hose . It is a size 6". The package weight is approx 13 ounces.

  • Brand: Dive Rite
  • ASIN: B00A7R7NL0
  • UPC: 879642001986
 - Dive Rite Drysuit Inflation Regulator
Dive Rite Drysuit Inflation

Compact in size and lightweight, the Dive Rite Drysuit Inflation Regulator is the perfect fit on an argon / drysuit inflation bottle. Weighing in at just 12.4 oz (351.5 g), and measuring just 3.5" x 1.25" (8.9cm x 3.2cm), this regulator will not add unnecessary bulk to a drysuit inflation configuration. The first stage is equipped with an OPV to give an additional margin of safety in the event of a first stage failure. Drysuit inflation hose included.

  • Color: Silver
  • Brand: Dive Rite
  • ASIN: B00A7R7C98
  • UPC: 879642002785
 - Dive Rite Mini Tech Pressure Gauge
Dive Rite Mini Tech Pressure

A clean, black and white face means the tech SPG is easy-to-read. A bourdon tube gauge, the tech SPG is calibrated to 5000-PSI in 100-psi increments (360-bar in 10-bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations. Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The tech SPG is suitable for oxygen service and is ce approved.

  • Brand: Dive Rite
  • ASIN: B00A7R8EZO
  • UPC: 879642007742
 - Dive Rite Finger 50ft, 24# Spool Orange
Dive Rite Finger 50ft, 24# Spool

In the early days of cave diving, reels were not available to buy off the shelf. Divers used anything they could, including empty electrical wire spools. When exploring, divers would pay out the line and if they didn't empty the spool it would be left in the cave for the next dive. Cave diving pioneer, Woody Jasper, used a medical tape spool with cover to hold that short length of safety line. Today, our 50-foot Finger Spool is most often used as a gap reel or for short distance exploration. Small and low-profile, a spool fits nicely out of the way in a pocket or clipped off to a D-ring. The holes in the side allow for clipping in a double ended snap anywhere along the perimeter of the spool to keep the line tight when not in use. Made of ABS plastic, finger spools are simple to use and virtually indestructible in the water. They come standard with a large stainless double ended clip.

  • Color: Orange
  • Brand: Dive Rite
  • ASIN: B00LTZ4HDQ
  • UPC: 879642006493
 - Dive Rite Regulator Octo Holder Black
Dive Rite Regulator Octo Holder

A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed. Divers utilizing a regulator necklace typically subscribe to the �donate the primary regulator� philosophy in an out-of-air scenario, with the primary regulator on a longer hose. The Dive Rite Regulator necklace allows for easy size adjustment for a perfect fit. Simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look. The necklace quickly installs onto the second stage by pulling both sides of the bungee to tighten the loop around the mouthpiece. Personalize your gear with a splash of color. The Dive Rite Regulator Necklace is available in Red, Yellow, Blue, Pink, and Tech Diver Black.

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B07PML3JXD
  • UPC: 879642004215
 - Dive Rite Scuba Diving Stage Bottle Rigging - 5 inches
Dive Rite Scuba Diving Stage Bottle Rigging - 5

Dive Rite's Stage Bottle Rigging comes with everything a diver needs to correctly set up secondary bottles for years of technical diving. Our 1-inch (2.54 cm) nylon webbing with 2,200 lbs (998 kgs) tensile strength forms the carrying strap. Resistant to breakage, rot and splitting, nylon webbing creates a durable and long-lasting foundation for stage rigging, yet can be cut free in case of entanglement. Rugged EPDM rubber hose retainer band resists rolling and tearing and has the right amount of stretch. A large webbing loop on the retainer is easy to grip even with gloves on. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion. (Tank Not Included)

  • Brand: Dive Rite
  • ASIN: B009VJYOA8
  • UPC: 879642003867
 - Dive Rite Travel XT Wing
Dive Rite Travel XT Wing

The Travel XT is a lightweight wing designed for single tank, warm water diving. Dive Rite's Travel Series of wings are small profile and ideal for travel and divers who wear a minimal amount of weight. At 25 lbs. (11.3 kg) of lift, the Travel XT can accommodate one 80 cubic feet (12 liter) tank with no more than 16 lbs. (7.26 kg) of additional weight With its donut-shape, the Travel XT Wing provides greater stability and control in the water. Donut-style or 360° wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim. The Travel XT Wing Series is built upon the legendary toughness of Super-Fabric Brand Technology, a technical fabric resistant to cuts, pinches and abrasions. This unique material has been created with a base fabric overlaid with tiny guard plates, this proprietary armored surface, along with material science and strategic geometric patterns, transforms ordinary fabric into Super-Fabric Brand Materials. The material maintains its flexibility and breathability, yet keeps sharp objects from penetrating. Dive Rite has married Super-Fabric with a 1,000-Denier Cordura inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. The Travel XT line...

  • Brand: Dive Rite
  • ASIN: B00A0BUWE8
 - Dive Rite FT1 First Stage Fixed Turret DIN Regulator Black
Dive Rite FT1 First Stage Fixed Turret DIN Regulator

High performance, fixed turret first stage.All of the performance and reliability you have come to expect from our XT1 first stage regulators is now available in a sleek, fixed turret design. The FT1 is the perfect first stage for open water, sidemount, or rebreather use. Flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing. Simple and compact, the FT1 has work of breathing performance on par with the premier regulators on the market. Rugged construction and a new wear resistant Sn-Ni plating mean this regulator will continue to look as good as it performs no matter what you throw at it.Balanced first stage design maintains consistent IP and gas delivery regardless of depth or tank pressure 4 low pressure ports and 2 high pressure ports All ports are angled 90 degrees from the DIN/Yoke fitting for ideal hose routing Environmentally sealed to protect against internal corrosion, contaminants, and freezing Uses industry standard oxygen compatible materials and assembly processes and is suitable for enriched oxygen gas mixtures* Available in DIN or Yoke *The FT1 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly...

  • Color: Black
  • Brand: Dive Rite
  • ASIN: B07R4RLYZF
  • UPC: 879642000477
 - Dive Rite XT2 Second Stage with 40
Dive Rite XT2 Second Stage with 40" Hose,

The XT2 Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT2's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT2 performs right alongside premier regulators on the market today. The Second-Stage Regulator ha an Ergonomic Dive/Pre-Dive Venturi Lever that is Easy-to-Adjust even with thick gloves. The Venturi Lever prevents Regulator Free-Flow. Second-Stage uses a Pneumatically Balanced Downstream Valve, which provides better performance at depth. The Second Stage has an External Adjustment Valve to Fine-Tune Inhalation Effort. The Second-Stage Housing and Cover are manufactured from Durable Impact Resistant ABS Plastic with Chromed Brass Adjustment Knob and barrel Tube. The Spring-and-Lever are Stainless Steel and the Second-stage comes standard with Teflon Coated Internal Parts, which makes it cold-water ready. The Second-Stage Regulator is available in a Right Hand Configuration has a Bright Yellow Cover for Easy Identification and comes with a 40" (101.6 cm) 3/8" Threaded Low Pressure Hose. The XT2 Second-Stage is Nitrox Ready and is covered by a Limited Lifetime Warranty.

  • Color: Green
  • Brand: Dive Rite
  • ASIN: B00BYKY4WU
  • UPC: 879642002914

Dive Rite Hose - Online Shop Results - Showing more then 46 results at ShopWorldlux.com

Promotions on Dive Rite Hose, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Efi Fuel Controller, Bear Stationery, and 00 Jeep Grand Cherokee Window

Looking for more Dive Rite Hose similar ideas? Try to explore these searches: Tropical Plant, 1990 Ford Club Wagon, and Red Eye Leaf Frog.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.