Compare Prices

Cove Bead DEALS

 - Freud 1-3/8
Freud 1-3/8" (Dia.) Cove & Bead Bit with 1/2" Shank

Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. 1-3/8" Overall Dia (D), 9/16" Carbide Height (h), 1/2" Shank, 2-3/8" Overall Length (H), 13/64" Large Radius (R1), 3/8" Bearing Dia (B), 7/32" Minor Height (m). Application: Decorative edging for cabinets, molding and furniture. Made In Italy.

  • Brand: Freud
  • ASIN: B00004T7LO
  • UPC: 008925381518
 - Whiteside Router Bits 3212 Cove and Bead Bit with 1/4-Inch Radius, 1-5/16-Inch Large Diameter and 5/8-Inch Cutting Length
Whiteside Router Bits 3212 Cove and Bead Bit with 1/4-Inch Radius, 1-5/16-Inch Large Diameter and 5/8-Inch Cutting

A Cove and Bead bit is a edge profile bit creating a concave and a convex edge in one pass. One of the more standard and traditional of router bits designs.

  • Brand: Whiteside Router Bits
  • ASIN: B000EHJ66S
  • UPC: 844278032123
 - Freud 1-3/8
Freud 1-3/8" (Dia.) Classical Cove & Bead Bit with 1/2" Shank (Quadra-Cut)

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B00004T7GZ
  • UPC: 008925383529
 - Whiteside Router Bits 3210 Cove and Bead Bit with 1/4-Inch Radius, 1-5/16-Inch Large Diameter and 5/8-Inch Cutting Length
Whiteside Router Bits 3210 Cove and Bead Bit with 1/4-Inch Radius, 1-5/16-Inch Large Diameter and 5/8-Inch Cutting

A Cove and Bead bit is a edge profile bit creating a concave and a convex edge in one pass. One of the more standard and traditional of router bits designs.

  • Brand: Whiteside Router Bits
  • ASIN: B0012JJVWQ
  • UPC: 844278032109
 - Bosch 85604MC 1-3/8 In. x 11/16 In. Carbide-Tipped Cove and Bead Router Bit
Bosch 85604MC 1-3/8 In. x 11/16 In. Carbide-Tipped Cove and Bead Router

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B000GYE10U
  • UPC: 000346352191
 - Amana Tool - 54292 Carbide Tipped Classical Cove & Bead 3/16 x 5/16 Radius x 1-1/2 Dia x 5
Amana Tool - 54292 Carbide Tipped Classical Cove & Bead 3/16 x 5/16 Radius x 1-1/2 Dia x

The positions of the bead and the cove are reversed on this Series of bits, with the bead coming off the bearing. With the optional 3/8" Pilot bearing, the bit produces a fillet at the base of the bead. Largest diameter bits should be run at reduced speed. Use in a handheld or table-mounted router, #54292, diameter (D) 1-1/2, Radius (r) 3/16, cutting Height (B) 5/8, shank (D) 1/2, overall length (L) 2-1/2, R1 5/16, flutes 2, 54292 carbide Tipped classical cove & bead 3/16 x 5/16 radius x 1-1/2 dia x 5/8 x 1/2 inch Shank

  • Brand: Amana Tool
  • ASIN: B000P4OGG0
  • UPC: 738685942925
 - Whiteside Router Bits 3282 Cove and Bead Bit with 2-Inch Large Diameter and 1-3/16-Inch Cutting Length
Whiteside Router Bits 3282 Cove and Bead Bit with 2-Inch Large Diameter and 1-3/16-Inch Cutting

A French Provincial Molding bit creates decorative molding for trim work around the house or on furniture. The profile can be used to create a variety of designs.

  • Brand: Whiteside Router Bits
  • ASIN: B0012JI5MS
  • UPC: 844278032826
 - Amana Tool - 54176 Carbide Tipped Flute & Bead 1/8 Radius x 1-1/2 Dia x 1/2 Sha
Amana Tool - 54176 Carbide Tipped Flute & Bead 1/8 Radius x 1-1/2 Dia x 1/2

Cut joints for staved assemblies, such as Circular planters, canoes, kayaks and hot tubs, with this pair of bits. One bit flutes an edge, and the other forms the mating bead. Use in CNC or table-mounted routers. It will cut plywood, hardwood, softwood and composition materials. For the best and accurate match, We recommend using a table-mounted router.#54176, diameter (D) 1-1/2, Cut depth (a) 1/8, radius (r) 1/8, cutting height (B) 15/32, shank (D) 1/2, overall length (L) 1-31/32, B1 1/4, L1 1-3/4, 54176 carbide Tipped flute & bead 1/8 radius x 1-1/2 dia x 1/2 x 1/2 inch shank set

  • Brand: Amana Tool
  • ASIN: B000P4UR5Y
  • UPC: 738685541760
 - Eyech 1/4 Inch Shank Flute & Bead Router Bit Set Canoe Joint Router Bits Woodworking Cutter Tools
Eyech 1/4 Inch Shank Flute & Bead Router Bit Set Canoe Joint Router Bits Woodworking Cutter

Eyech 1/4-Inch Shank Flute & Bead Canoe Joint Router Bit Set  Feature: -This set of canoe joint router bits provide a great way to make joints of variable angles from the same tool setup.  -This type of joint is called a canoe joint because of the flexibility needed for a variety of angles when constructing a canoe.  -Every slat on a canoe joins its neighboring slat at a slightly different angle, and this router bits set allows this without a different setup for each joint. -Always cut the male side of the joint at full depth. The cutting depth of the female side will determine how much angle is achievable in the joint.  -Idea for Making cedar strip, hot tubs, Planters, wooded Canoe using interlocking sealed edge joint.  Specification: Blade Material: Industrial Grade Micro Grain Carbide Body Material: Carbide Tipped Flute & Bead Shank diameter: 1/4inch Flute & Bead Cutter diameter: 1-1/2inch Flute Router Bit Cut Depth: 0.568cm Flute Router Bit Length: 1-3/4inch Bead Router Bit Cut Depth: 1/4inch Bead Router Bit Length: 2-1/8inch   Package Included: 1pc flute router bit +1pc bead router bit 

  • Brand: Eyech
  • ASIN: B07FNB16Y7
  • UPC: 602701922119
 - Yonico 13201q 1/4-Inch Bead 2 Bit Canoe Joint Router Bit Set 1/4-Inch Shank
Yonico 13201q 1/4-Inch Bead 2 Bit Canoe Joint Router Bit Set 1/4-Inch

This set of canoe joint router bits will cut 1/4" bead - male and female joint components with a 1/8" cutting depth. 1/4" shanks. A great way to make joints of variable angles from the same tool setup. This type of joint is called a canoe joint because of the flexibility needed for a variety of angles when constructing a canoe. Every slat on a canoe joins its neighboring slat at a slightly different angle, and this router bits set allows this without a different setup for each joint. Always cut the male side of the joint at full depth. The cutting depth of the female side will determine how much angle is achievable in the joint.

  • Brand: Yonico
  • ASIN: B078HTHJCV
  • UPC: 765573833010
 - Freud 3/4
Freud 3/4" (Dia.) Top Bearing Classical Cove & Bead Groove Bit with 1/4" Shank

These bits produce a cove and bead groove with a flat bottom to add depth to furniture or millwork, and they can also create a decorative edge profile. 3/4" Overall Dia (D), 1/4" Small Dia (n), 3/32" Small Radius (R2), 7/16" Carbide Height (h), 1/4" Shank, 2-1/8" Overall Length (H), 1/8" Large Radius (R1) Ideal For: Decorative detail on any woodwork. Application: Template work, decorative edges and elaborate grooves. Made In Italy.

  • Brand: Freud
  • ASIN: B00004T7HV
  • UPC: 008925383758
 - Vermont American 23152 3/16-Inch Radius Carbide Tipped Cove and Bead Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch Shank
Vermont American 23152 3/16-Inch Radius Carbide Tipped Cove and Bead Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch

A classic woodworking design. An attractive accent to any piece. 1/2 bearing diameter.

  • Color: stainless
  • Brand: Vermont American
  • ASIN: B000K7OQ8U
  • UPC: 045325738320
 - Timberline 400-20 Carbide Tipped Classical Cove & Bead 3/8 x 3/8 R x 2 Inch D x 1 Inch CH x 1/2 SHK w/ Lower BB Router Bit
Timberline 400-20 Carbide Tipped Classical Cove & Bead 3/8 x 3/8 R x 2 Inch D x 1 Inch CH x 1/2 SHK w/ Lower BB Router

Timberline 400-20 TIMBERLINE CLASSICAL OGEE 1/2S

  • Brand: Timberline
  • ASIN: B004D4BYQI
  • UPC: 738685400203
 - 2 pc 1/2
2 pc 1/2" SH 1/4" Dia. Canoe Flute and Bead Router Bit

2 pc 1/2" Shank 1/4" Diameter Flute and Bead Router Bit Set Brand new, high quality, industrial grade Idea for Making cedar strip, hot tubs, Planters, wooded Canoe using interlocking sealed edge joint. C2 Carbide Tipped - Micro grain grade provides increased strength and utmost resistance

  • Brand: BLGRRA
  • ASIN: B0738P2NTB
  • UPC: 650403386593
 - Yakamoz 1/4-Inch Shank Flute & Bead Canoe Joint Router Bit Set Carbide-Tipped Woodworking Milling Cutter
Yakamoz 1/4-Inch Shank Flute & Bead Canoe Joint Router Bit Set Carbide-Tipped Woodworking Milling

Yakamoz 1/4-Inch Shank Flute & Bead Canoe Joint Router Bit Set This set of canoe joint router bits provide a great way to make joints of variable angles from the same tool setup. This type of joint is called a canoe joint because of the flexibility needed for a variety of angles when constructing a canoe. Every slat on a canoe joins its neighboring slat at a slightly different angle, and this router bits set allows this without a different setup for each joint. Always cut the male side of the joint at full depth. The cutting depth of the female side will determine how much angle is achievable in the joint. Idea for Making cedar strip, hot tubs, Planters, wooded Canoe using interlocking sealed edge joint. Specification: Blade Material: Industrial Grade Micro Grain Carbide Body Material: Carbide Tipped Flute & Bead Shank diameter: 1/4" Flute & Bead Cutter diameter: 1-1/2" Flute Router Bit Cut Depth: 0.568" Flute Router Bit Length: 1-3/4" Bead Router Bit Cut Depth: 1/4" Bead Router Bit Length: 2-1/8" Package Included: 2pcs x Router Bits

  • Brand: Yakamoz
  • ASIN: B07BJ4YNMS
  • UPC: 603935135115
 - Whiteside Router Bits 3209 Cove and Bead Bit with 5/32-Inch Radius, 1-1/8-Inch Large Diameter and 1/2-Inch Cutting Length
Whiteside Router Bits 3209 Cove and Bead Bit with 5/32-Inch Radius, 1-1/8-Inch Large Diameter and 1/2-Inch Cutting

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B0012JI546
  • UPC: 767654963685
 - Amana Tool - SC646 Carbide Tipped 3-Wing Reversible Detail Bead & Cove 1/4 Radius x 3 Dia
Amana Tool - SC646 Carbide Tipped 3-Wing Reversible Detail Bead & Cove 1/4 Radius x 3

Rub collar for 3/4" Arbor only!, #SC646, (D) diameter: 3, (D) bore: 1/2 & 3/4, (b) Cutting height: 15/16, (r) radius: 1/4, B1: 3/8, C: 5/8, D1: 1-3/4, Optional rub collar: c-006, SC646 carbide Tipped 3-Wing reversible detail bead & cove 1/4 radius x 3 dia x 15/16 x 1/2 & 3/4 bore

  • Brand: Amana Tool
  • ASIN: B000P4QG0E
  • UPC: 738685726464
 - Timberline 400-18 Carbide Tipped Classical Cove & Bead 1/4 x 3/16 R x 1-3/8 D x 11/16 CH x 1/2 Inch SHK w/ Lower BB Router Bit
Timberline 400-18 Carbide Tipped Classical Cove & Bead 1/4 x 3/16 R x 1-3/8 D x 11/16 CH x 1/2 Inch SHK w/ Lower BB Router

Timberline 400-18 TIMBERLINE CLASSICAL OGEE 1/2S

  • Brand: Timberline
  • ASIN: B004D4J1XG
  • UPC: 738685400180
 - Freud 1/8
Freud 1/8" Radius Top Bearing Cove & Bead Groove Bit with 1/4" Shank

Create a traditional cove and bead profile that includes a flat bottom, creating the illusion of panel construction. These bits can also be used to create a decorative edge profile. 3/4" Overall Dia (D), 1/4" Small Dia (n), 31/64" Carbide Height (h), 1/4" Shank, 1/8" Radius ( R ), 2-3/16" Overall Length (H), 5/64" Minor Height (m) Ideal For: Ornamental edges and grooves. Application: Template work, decorative edges and elaborate grooves. Made In Italy.

  • Brand: Freud
  • ASIN: B00004T7I4
  • UPC: 008925383871
 - Rockler 1/8'' Bead & Radius Bit
Rockler 1/8'' Bead & Radius

Canoe makers use these bits to make long, seamless joints in the curving hulls of their canoes. Just use half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. Our bits are available in the smaller sizes for lightweight canoes, and also with a radius of up to 3/8" for coopered barrels, buckets and bowfront doors. The entire bit can also be used as an attractive decorative edge or molding profile. Bits have two flutes with a 1/2" guide bearing. ROUTER BIT DIMENSIONS A: 1" B: 5/8" C: 1/2" D: 1-1/2" R: 1/8" A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a full refund.

  • Brand: Rockler
  • ASIN: B001DT1UVA

Cove Bead - Online Shop Results - Showing more then 70 results at ShopWorldlux.com

Promotions on Cove Bead, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Energizer Telephone Battery, Simpson Racing Shoes, and Grandpa Throw Pillow

Looking for more Cove Bead similar ideas? Try to explore these searches: 1956 Ford Wagon, Happy Baby Girl, and Keg Beer Foam.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.