Compare Prices

Cobalt Straight Shank DEALS

 - Migiwata Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal Case
Migiwata Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal

OVERVIEW This is a 19-piece drill bit set engineered to handle a long time of cutting. The bits will give you the convenience of a high-speed drilling in stainless steel, titanium, and other thick metal workpieces. Equipped with a split-point at the tip, the cobalt steel bits get on drilling upon contact. With them, you don't have to worry about walking or the need for a pilot hole. The fact that it doesn't wander means great drilling accuracy, something that comes in handy especially when doing repetitive drilling of holes. The sizes range from 1.0mm to 10mm. The small increments ensure you get that precise bit size. What's more, the sizes are printed on each compartment and on bits over 3.5mm to eliminate any guesswork. KEY FEATURES Constructed of M35 grade cobalt steel (with 5 percent cobalt added to high speed steel) for super abrasive resistance in tough metals Cobalt steel extends cutting edge life Extra hard drill for greater wear 135° split point tip starts on contact, cuts with less force WHAT'S INCLUDED 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. One piece for each size. Package:Indexed metal case SATISFACTION GUARANTEEDSome customers said the drill bit box was open and the drill bits were all s...

  • Brand: Migiwata
  • ASIN: B07FXK9VHV
  • UPC: 666389485861
 - Titan TR96833 M42 Cobalt Chucking Reamer, Straight Shank, Right Hand Spiral Cut, 7.5 mm, 1 - 1/2
Titan TR96833 M42 Cobalt Chucking Reamer, Straight Shank, Right Hand Spiral Cut, 7.5 mm, 1 - 1/2" Cutting Length, 0.2792" Shank Diameter, 6" Overall

Series 1935R M42 Cobalt Chucking Reamer, Straight Shank, Right Hand Spiral Cut.

  • Brand: Titan
  • ASIN: B00P2UTLRQ
 - Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast Iron and Hard Metals
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast

M35 Grade Cobalt Steel Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant. For Drilling Stainless Steel This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. 135 Degree Split Point The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90° and 118°. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut. Lowest Cost Per Hole Drilled Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled. Not Suggested for Hardened Steel, High Carbon Steel and Steels Blended with Impurities M35 grade cobalt drill bits are NOT suitable for hardened steel, high...

  • Brand: Migiwata
  • ASIN: B078YLRFRD
  • UPC: 712492951714
 - Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 5/32 Inch
Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 5/32

The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with no finish or coating, and is most commonly chosen for reaming in high-temperatures generated by machining tough, hard materials applications, or with abrasive materials. Cobalt steel tools are good for machining stainless steel and nickel alloys, which are harder and generate more heat through friction, giving cobalt a longer-lasting sharp edge than an equivalent high-speed steel tool. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. Cobalt steel is commonly chosen to make tools with exceptional wear resistance and temperature stability, and can be fed at higher rates than high-speed steel, while being more economical than carbide. For reamers in the 128-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1...

  • Brand: Alvord Polk
  • ASIN: B002PHN828
  • UPC: 662783002796
 - Irwin Industrial Tools 63221 Cobalt Fractional Straight Shank Jobber Length Metal Index Drill Bit Set, 21-Piece
Irwin Industrial Tools 63221 Cobalt Fractional Straight Shank Jobber Length Metal Index Drill Bit Set,

This IRWIN Cobalt High-Speed Steel Drill Bit Set includes drill bits made of M-42 5% cobalt high-speed steel for super abrasive resistance in tough metals. The 135° split point reduces feed pressure for easy penetration without work hardening, while the heavy-duty spiral flute design produces faster chip ejection. These versatile drill bits come in a metal index case for easy transport and organization.

  • Color: Gold metallic
  • Brand: Irwin Tools
  • ASIN: B000BOAD1G
  • UPC: 042526632211
 - Wrightus Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy
Wrightus Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium

Different types of drill bits are used to cut holes in different types of materials.Drill through metal like a champion! Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. This set of Wrightus M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, wood, and plastic too. Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant; this is an important factor in drilling hard materials because the friction of metal against metal can produce high temperatures that damage the material or the drill bit. Tests shows that the M35 cobalt steel drill bits can penetrate a 5mm-thick 304 stainless steel plate in 5 seconds. Notice: The working life of the drill bits can be largely prolonged by using with cooling liquid. Specifications: Material: M35 Cobalt Steel(5% Cobalt and 95% High Speed Steel) Angle Point: 135 Degree Flute Type: spiral Hardness: Rockwell 67 Shank Type: straight shank You will get: 1...

  • Color: metal drill bits
  • Brand: Wrightus
  • ASIN: B07D3BC639
 - TTC W (.3860
TTC W (.3860") Cobalt Straight Flute Straight Shank RH Chucking

Designed for use in turret lathes, screw machines, drill presses and all types of machine tool equipment. Ground with a 45° chamfer they are suitable for reaming most materials ordinarily encountered.

  • Brand: TTC PRODUCTION
  • ASIN: B00CYNPESY
 - DRILLFORCE (10 Pcs) 5/32 in. x 3-1/8 in. HSS COBALT Drill Bits, Jobber Length, Straight Shank, Metal Drill,Ideal For Drilling On Mild Steel, Copper, Aluminum, Zinc Alloy Etc.
DRILLFORCE (10 Pcs) 5/32 in. x 3-1/8 in. HSS COBALT Drill Bits, Jobber Length, Straight Shank, Metal Drill,Ideal For Drilling On Mild Steel, Copper, Aluminum, Zinc Alloy

Specifications: * Brand new and high quality. * Material: 5% Cobalt M35 High Speed Steel. * Angle Point: 135 Degree. * Shank Type: Straight and Round Shank. * Specification Met: ANSI. * Hardness: 65-66 Rockwell. High Speed Steel: * High speed steel construction provides ultimate durability, the cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean. Twist Design: * The split point tip and twist design increases cutting speed while easy self centering prevents walking. Say bye to all those chips and particles, with the twist design the drill bit can quickly clears them out, and leaves a clean, smooth hole. Notice: * Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage. * Not For Use On Concrete, Masonry. * Please check the detail information carefully before purchasing. * Please allow 1-2mm in size measurement chart for variance due to manual measurement. * Your satisfaction is our utmost concern, please feel free to contact us for any questions and concerns. Return and Feedback: * Return: Our 30-day Satisfaction Guarantee customers to return new and unused products in their original factory condition for any reason w...

  • Color: Gold
  • Brand: DRILLFORCE
  • ASIN: B01M082W1K
 - Neiko 12008A 1/4
Neiko 12008A 1/4" Hex Shank Quick Change Drill Bits, 13 Piece | Cobalt Coated HSS | 1/16" -

Light duty drill bit set for home or light construction work. This set comes with 13 of the most popular sizes drill bits.

  • Brand: Neiko
  • ASIN: B0079M9JK4
  • UPC: 837013120087
 - F&D Tool Company 35274 Shank Type Woodruff Keyseat Cutter, Straight Tooth, Cobalt, 303 American Standard, 3/8
F&D Tool Company 35274 Shank Type Woodruff Keyseat Cutter, Straight Tooth, Cobalt, 303 American Standard, 3/8" Diameter, 3/32" Width of Face, 2 3/32" Overall

All sizes have a uniform 1/2" diameter shank. Right hand cutters are standard. Left hand cutters are made to order with prices upon application.

  • Brand: F&D Tool Company
  • ASIN: B00GWNX8S0

Cobalt Straight Shank - Online Shop Results - Showing more then 14 results at ShopWorldlux.com

Promotions on Cobalt Straight Shank, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Bruder Pro Series, Asian Knot Templates, and Oakland Living Hummingbird Bar

Looking for more Cobalt Straight Shank similar ideas? Try to explore these searches: Genuine Front Brake Disc Rotor, 040 Brake Hose, and Avenue Stretch Leggings.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.