Compare Prices

30mm One Piece DEALS

 - TAC Vector Optics 30mm One Piece Extra Light ACD Scope Mount Anti Cant Device ACD Bubble Level Mount w/ 1
TAC Vector Optics 30mm One Piece Extra Light ACD Scope Mount Anti Cant Device ACD Bubble Level Mount w/ 1" Adapter 139mm

Model:SCACD-08 ACD Mount Diameter: 30mm Overall Length:139mm (5.5 inch) Install Length:80mm (3.2" two big bolts distance) 35mm(1.4"from bottom to ring center)Weigth:150g (5.3 ounce)Finish:Black matte Anti Cant Device mount One piece mount design Bap between two rings 55mm (2.2 inch)High quality 6063 T6 aircraft grade aluminum alloy Including items: hex key, 25.4mm 1" adapter, half ring with picatinny rail

  • Brand: TAC Vector Optics
  • ASIN: B0716LR4LR
  • UPC: 700381150386
 - Primary Arms Deluxe Extended 30mm Scope Mount for Picatinny Platforms
Primary Arms Deluxe Extended 30mm Scope Mount for Picatinny

Primary Arms Deluxe Extended 30mm Scope MountThe Primary Arms Deluxe Extended Scope Mount is ideal for variable magnification power optics on 1913 Picatinny and similar flat-top mounting platforms. It's a great option for 1-4x and 1-6x scopes with 30mm scope tubes. Constructed of aluminum with a durable matte black finish. This mount provides 2.28 inches of clearance between the rings and places the center of your 30mm scope 1.5 inches above the rail.SpecificationsBrand: Primary ArmsFinish: Hardcoat AnodizedManufacturer: Primary ArmsOptic Type: 30mmPlatform: M1913 PicatinnyTo make sure that the mount nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.

  • Brand: Primary Arms
  • ASIN: B018W7MNKC
  • UPC: 818500010432
 - Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter |

  • Color: Black
  • Brand: Monstrum
  • ASIN: B07G2SPBXL
  • UPC: 704715312365
 - Thompson Center One Piece Scope Base & Ring Combo, 30mm, Medium
Thompson Center One Piece Scope Base & Ring Combo, 30mm,

Achieve optimal scope placement on your rifle with the Thompson/center 30mm, Medium, one piece scope base & ring combo. This tool is lightweight and constructed from machined, anodized billet aluminum with mounting hardware included so you can easily install your scope and get back to what matters most; hunting.

  • Brand: Thompson Center
  • ASIN: B0778XTRF8
  • UPC: 661120412854
 - CCOP USA 30mm Cantilever Scope Mounts
CCOP USA 30mm Cantilever Scope

Precision CNC machined from hardening 6061 aircraft grade aluminum. Enhanced one-piece construction mount for durability and stability. Fits any Picatinny system and any 30mm optics sight. Provide a 2" Forward Extension for better eye relief. High-quality anodization, matte black finish. Includes Torx screws and Torx driver.

  • Color: Black
  • Brand: CCOP
  • ASIN: B00DP26OUK
  • UPC: 818179014489
 - Primary Arms Deluxe Rifle Scope Mount - 30mm
Primary Arms Deluxe Rifle Scope Mount -

Primary Arms Deluxe 30mm Picatinny Scope MountThe Primary Arms Deluxe Scope Mount is ideal for 1913 Picatinny and similar "flat-top" mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes. To make sure the mounting nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.Specifications:Brand: Primary ArmsFinish: Hardcoat AnodizedManufacturer: Primary ArmsOptic Type: 30mmPlatform: M1913 PicatinnyWeight: 8.2 Oz

  • Brand: Primary Arms
  • ASIN: B00FGGIL9K
  • UPC: 818500010197
 - MEOPTEX Universal 30Mm/1-Inch Riflescope Scope ring mount One Piece Base piece mount/dual base
MEOPTEX Universal 30Mm/1-Inch Riflescope Scope ring mount One Piece Base piece mount/dual

Universal 30Mm/1-Inch One Piece Base piece mount/dual base "Fits all 30mm and 1"" riflescopes "3/8"" rail and 7/8"" rail "One piece w/Recoil-Stop "Total Height: 57mm/2.24" "Internal Anti-Scratch Padding "

  • Brand: MEOPTEX
  • ASIN: B07CSPGB5N
  • UPC: 634923376135
 - Dasen One-Piece Scope Mount for Picatinny Rail Fits 1 inch/30 mm Tube Rifle Scope
Dasen One-Piece Scope Mount for Picatinny Rail Fits 1 inch/30 mm Tube Rifle

Technology improved to be more durable and scratch-proof and looks more better. Mounts quickly and easily to the riflescope tube. Specifications: Material: Aluminum Alloy Color: Black Ring Diameter: 30mm (1.2") Reducer Diameter: 25.4mm (1") Product weight: 0.5lbs. Package dimensions: 5.71"x 2.56"x 2.56" Package includes: 1 x Dual Ring Scope Mount 2 x Reducer 2 x Wrench

  • Color: scope mount
  • Brand: Dasen
  • ASIN: B0759XBG9Q
  • UPC: 612289841061
 - Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 30 mm Diameter
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 30 mm

When lining up your shot, every last ounce counts! Which is why we designed the Monstrum Tactical Slim Profile Series of mounts to be sleeker and lighter than ever. Crafted from lightweight 6061 aluminum, the mount weighs in at a mere 6 ounces. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount. The mount is built for standard 30 millimeter tube scopes for mounting to any standard Picatinny rail equipped rifle. The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position. It comes equipped with an easy to operate quick release mechanism that allows for fast and easy attachment and detachment, allowing you to quickly mount or remove your rifle scope depending on need. The mounts attaches via two simple quick release levers rather than with sets screws and allen wrenches like standard mounts The mount is 5.5 inches in total length. The base is 3 inches in total length. There is 2.5 inches of spacing between the two rings. The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance.

  • Brand: Monstrum
  • ASIN: B07MJCVMBY
  • UPC: 704715312525
 - Nightforce Optics Magmount, One Piece Mount with 30mm Rings, 1.37
Nightforce Optics Magmount, One Piece Mount with 30mm Rings, 1.37" 0 MOA, 3

Nightforce Magmount 1.375 0 MOA 30mm A256

  • Brand: NightForce
  • ASIN: B00CSW8DNE
  • UPC: 847362006208
 - TAC Vector Optics 30mm One Piece Angle Indicator Bubble Level Riflescope Picatinny Mount Rings Black
TAC Vector Optics 30mm One Piece Angle Indicator Bubble Level Riflescope Picatinny Mount Rings

Features 100% avoid CANT, Designed for Real Fire Calibers & Long Range Shooting, 30mm Diameter w/ 1" Adapter Easy to Use, Air Bubble Level, Angle Indicator on Side, Designed for Real Firearms, Full Metal, See-through This ADI is calibrated in degrees and cosines give you an instant read out which can enter directly into ballistic software program on your pocket PC or use with a pre-printed angle drop chart to achieve high accurate shooting. The red needle moves with your rifle and displays a number that indicates the percent your rifle is off level. Multiply the indicated percent by the target distance to easily calculate the adjusted distance for gravity. The bubble level which can be flipped to the side also allows you to have an additional indicator to achieve much higher accuracy. Specifications: Diameter:30mm with 1" adapter Overall Length:140mm (5.5 inch) Ring Gap:55mm (2.1 inch) Ring Width:26mm (1.0 inch) Indicator Dia.:30mm (1.2 inch) Weight:180g (6.3 ounce) Finish:Black matte Mount:21mm picatinny Angle indicator and scope level support long range precision shooting Designed for real fire arms The bubble level can be put on either side 30mm one piece mount skeletonized extra light See-through style Level and indicator were both center aligned during the assembling High q...

  • Color: black
  • Brand: TAC Vector Optics
  • ASIN: B076DFKM4P
  • UPC: 700381150539
 - Hammers One Piece Magnum Airgun Air Rifle 30mm Scope 3/8
Hammers One Piece Magnum Airgun Air Rifle 30mm Scope 3/8" 11mm Dovetail Mount w/Stop

Fits all scopes with 30mm main tube Mounts onto 3/8inch and 11mm dovetail rails or grooved receivers 36mm center height good for mount scope with adjustable objective size up to Removable threaded stop pin is built in and can be activated easily when needed 4 Mounting screws give lots of clamping power and make the mounted scope firm and stay in place under recoil in every shooting situation Full length of the mount is 4inch Opening between two rings: 2.3inch Works with typical full-size 30mm air rifle scopes around 12inch or longer

  • Brand: Hammers
  • ASIN: B07TKGNGP1
  • UPC: 816307020760
 - Flat Top Offset One Piece QD Scope Mount with Quick Release Cam Locks 1913 Picatinny Rails
Flat Top Offset One Piece QD Scope Mount with Quick Release Cam Locks 1913 Picatinny

A very solid and heavy duty offset ring mount to install magnified optics scope for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube, especially ones with illuminated reticles The QD cam locks can be finger adjusted when needed. With the cam lever at unlock position, pull up and rotate the star wheel on the opposite end of the clamping bolt to adjust Ring Size: 30mm (1inch metal size inserts included) Centerline Height - 40mm Machined from extruded aluminum alloy 6061 Anodized black matte finish Clamp attachment - two finger adjustable quick release cam locks Height from top of rail to bottom of cradle: 1" Overall height 2.50" Overall length 5.30" Inner space between the rings 64mm (2.52inch) Ring width: 16mm(0.63inch) Recoil lug: 2 cross-slot square bolt shafts

  • Color: Anodized black
  • Brand: Hammers
  • ASIN: B006MYCIOE
  • UPC: 857155007855
 - Zeadio 1-Inch to 30-mm One-Piece Scope Mount with Qick Detach Locks compatible with Picatinny Weaver Rail, ZS-KC31A
Zeadio 1-Inch to 30-mm One-Piece Scope Mount with Qick Detach Locks compatible with Picatinny Weaver Rail,

Brand: Zeadio Model: ZS-KC31A - Quick-detach feature provides emergency install and release - Good for use with both 1-inch and 30mm scopes - One piece body design for better scope alignment - Manufactured from aircraft grade aluminum alloy - Two integral 30mm rings with 1" size inserts Warranty Include a limited one-year manufacturer Zeadio.com's warranty against defects in materials and workmanship. Package Includes: 1 x Zeadio ZS-KC31A Scope Mount 2 x 1" size inserts About Manufacturer At Zeadio, we are dedicated to improving quality by applying industrial science to product development, manufacturing, and testing. Our mission is to combine customer feedback with innovative design to create the most advanced and compelling new products. For customer service or warranty, please feel free to contact seller Zeadio or manufacturer Zeadio.com

  • Color: Qick Detach Locks
  • Brand: Zeadio
  • ASIN: B015QV8W98
  • UPC: 799559229702
 - UniqueFire 1 inch/30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Scope Mount
UniqueFire 1 inch/30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Scope

PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first. Quick release outdoors integral scope ring tactical both side mount black for vortex, Nikon, Leopold, Burris and other scopes is a quick release 25.4mm/30mm scope ring, build with one piece integral machined aluminum construction. The quick release feature.

  • Color: Black
  • Brand: UniqueFire
  • ASIN: B01MQZRJY5
  • UPC: 190186002834
 - 30 mm Dia. One-piece Dual Ring scope mount,High Profile with big See-Through, 110 mm/ 4.5
30 mm Dia. One-piece Dual Ring scope mount,High Profile with big See-Through, 110 mm/ 4.5" base length,

Tufforce 30 mm One-piece Dual Ring for 30 mm tube scope, High Profile with big See-Through

  • Color: BLACK
  • Brand: TufForce
  • ASIN: B004S2N5IU
 - TAC Vector Optics New Tactical 30mm Scope Cantilever One Piece Weaver Mount Ring w/Triple Picatinny Rail Color Black
TAC Vector Optics New Tactical 30mm Scope Cantilever One Piece Weaver Mount Ring w/Triple Picatinny Rail Color

Vector Optics Hydra Tactical 30mm One Piece Scope Mount Long Style w/ Triple Picatinny Rails (SCTM-07B) Tactical Style, Heavy Duty, with 30mm to one inch adapter, with triple picatinny rails on each ring, see-through type Model: SCTM-07B Hydra Diameter: 30mm (with 30mm / 25.4mm plastic round adapter) Length: 150mm (90mm for the gap between two rings) Weight (net): 275g (9.7 ounce) Height: 40mm (1.6 inch from bottom to the center of ring) Fit on 21mm picatinny rail with quick release and fasten See-through type High quality aluminum alloy In durable black matte finish Shock proof and heavy duty can be used on real fire caliber Free fitting involved: 30mm / 25.4mm plastic round adapter

  • Color: Black
  • Brand: TAC Vector Optics
  • ASIN: B00N5JG85Y
  • UPC: 700381147539
 - TAC Vector Optics 30mm One Piece Riflescope ACD Scope Mount Anti Cant Device Bubble Level 150mm 5.9
TAC Vector Optics 30mm One Piece Riflescope ACD Scope Mount Anti Cant Device Bubble Level 150mm 5.9" Length

Model:SCACD-09 ACD Mount Diameter: 30mm Overall Length:149mm (5.9 inch) Install Length:59mm (2.3", two big bolts distance)30mm(2.4"from bottom to ring center)Weigth:167g (5.9 ounce)Finish:Black matte Anti Cant Device mount designed for real fire armsOne piece mount design Bap between two rings 59mm (2.3 inch)High quality 6063 T6 aircraft grade aluminum alloy Including items: hex key

  • Brand: TAC Vector Optics
  • ASIN: B0716LRJTX
  • UPC: 700381150393
 - Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch

When lining up your shot, every last ounce counts! Which is why we designed the Monstrum Tactical Slim Profile Series of mounts to be sleeker and lighter than ever. Crafted from lightweight 6061 aluminum, the mount weighs in at a mere 6 ounces. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount. The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle. The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position. It comes equipped with an easy to operate quick release mechanism that allows for fast and easy attachment and detachment, allowing you to quickly mount or remove your rifle scope depending on need. The mounts attaches via two simple quick release levers rather than with sets screws and allen wrenches like standard mounts The mount is 5.5 inches in total length. The base is 3 inches in total length. There is 2.5 inches of spacing between the two rings. The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance.

  • Brand: Monstrum
  • ASIN: B07MJCT11L
  • UPC: 704715312389
 - Leupold Mark 4 30mm 20-MOA IMS Mount, Matte Finish
Leupold Mark 4 30mm 20-MOA IMS Mount, Matte

Leupold specifically designed this Mark 4 IMS (Integral Mounting System) for tactical applications. It includes a Mark 4 IMS Integral Base and a Mark 4 IMS 30mm Integral Ring Insert and features a monolithic, cantilever design that provides strong and durable support for your riflescope in the most challenging conditions. The integral base and rings are forged from a single-piece of steel for improved durability and strength. It securely attaches to the Picatinny/Weaver rails. 20 MOA Cant This model has a 20MOA cant built into the mount for long range shooting. Dual Use All Leupold optics offer performance that makes them equally at home in hunting or tactical environments, thanks to their outstanding accuracy, legendary ruggedness, and absolute waterproof integrity.

  • Color: Matte Black
  • Brand: Leupold
  • ASIN: B01M4HGXVL
  • UPC: 030317013141

30mm One Piece - Online Shop Results - Showing more then 36 results at ShopWorldlux.com

Promotions on 30mm One Piece, clothing, electronics, cosmetics and more! Everyday lucky draw! Monthly Off Coupon. Original and Fast. Exclusive Brand Sale. Try to explore these searches: Whisperceiling Ventilation Fan, Headless Bass, and Adjustable Ram Cap

Looking for more 30mm One Piece similar ideas? Try to explore these searches: 0.5' Carbon Hole Saw, Cherry Wood Bookcases, and Snap Bits Bite.

ShopWorldlux.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.